bulb replacement 1999 lhs
blfolmer
09-29-2004, 01:40 PM
how do i replace a bulb in my headlight assembly. i cant't rach bulbs from inside, and can't remove assemby because it it pinned in on bottom by fender fascia. any tricks. i want to replace bulbs with xenon bulbs
Toban
09-30-2004, 06:10 AM
I know on my 95 I had to remove the entire headlight housing, first take the top plastic shield off between the radiator and front nose clip, then back out the screws for the light assembly. I can re-type the instructions out of my repair manual if you need, let me know.
blfolmer
09-30-2004, 11:03 PM
please send printed steps to change headlight bulb
Toban
10-01-2004, 07:29 PM
I scanned the page, complete with pics, it's 440kb in size so be patient for it to load. It's to large just to send to the photo album here so. I'll leave it on my domain for a little while, take your time, enjoy...
http://www.cfrobbins.com/headlights.gif
http://www.cfrobbins.com/headlights.gif
abookout
11-20-2005, 09:44 PM
I scanned the page, complete with pics, it's 440kb in size so be patient for it to load. It's to large just to send to the photo album here so. I'll leave it on my domain for a little while, take your time, enjoy...
http://www.cfrobbins.com/headlights.gif
Hi - I also have a 95 Chrysler LHS and need to replace both headlights, as the plastic is so pitted, have to drive with brights on. Can you advise what the part numbers are to replace and would you be willing to scan that document to me?
Female in distress ; (
http://www.cfrobbins.com/headlights.gif
Hi - I also have a 95 Chrysler LHS and need to replace both headlights, as the plastic is so pitted, have to drive with brights on. Can you advise what the part numbers are to replace and would you be willing to scan that document to me?
Female in distress ; (
mrwreckless
10-20-2008, 12:07 AM
i have an o1 and manual says remove front bumper.
Automotive Network, Inc., Copyright ©2026
