Engine measurement estimate please

I am hauling a D16 this weekend, and I am not able to find the rough dimensions- depth, width and height of the engine with tranny. If anyone has their car and a tapemeasure handy. thanks
rough estimate

is that a d16a1 you are thinking of? not all d16's were created equal

its a ZC.

D16A1 1.6 16V DOHC PGM-FI 1590 113hp@6250rpm 99tq@5500rpm '86-'89 Integra (USA)
D16A3 1.6 16V DOHC PGM-FI 1590 118hp@6500rpm 103tq@5500rpm '88-'89 Integra (USA)
D16A6 1.6 16V SOHC PGM-FI 1590 108hp@6000rpm 100tq@5000rpm '88-'91 Civic Si '88-'91 CRX Si
D16A8/9 1.6 16V DOHC PGM-FI 1595 137hp@6800rpm 108tq@5700rpm '88-'91 Civic/CRX Si (JDM) '90-'93 Integra LS/RS (USA)
D16Y5 1.6 16V SOHC VTEC-E PGM-FI 1590 115hp@6200rpm 104tq@5400rpm '96-'00 Civic HX (USA)
D16Y7 1.6 16V SOHC PGM-FI 1590 106hp@6200rpm 103tq@4600rpm '96-'00 Civic CX/DX/LX (USA)
D16Y8 1.6 16V SOHC VTEC-II PGM-FI 1590 127hp@6600rpm 107tq@5500rpm '96-'00 Civic EX (USA)
D16Z6 1.6 16V SOHC VTEC PGM-FI 1590 125hp@6600rpm 106tq@5200rpm '92 - '95 Civic EX/Si (USA) '93-'95 Del Sol Si (USA)

unless you want someone to run off to japan with a tape measure you'd better figure which USDM motor uses the same platform

well. I know that the engines are similar in size. meaning, within 6in. each way. I just need a rough estimate for say a D16A6. that would do it. I dont need it exact. Just so I can see if it will fit in a car trunk.