Lug pattern/backspacing for '00 PreRunner?

What is it? I've seen this number float around, 6x139.7. Is that correct?

Please guys. Okay, The 6x139.7 i found to be correct. But do the 2wd and 4wd have different center bore? I know the 2wd is 3.25” (82mm), anyone know if the 4wd is different?

And on top of that, if the center bore is different on the 2wd and 4wd, which would the PreRunner have? Being a 2wd with a 4wd setup.

Pre-runner is the same as 4wd in every dimension. It is a 6-lug, 5.5" BCD pattern with 4.5" offset.

I don't know the center bore (for hub-centric?) but most aftermarket wheels are lug-centric anyway. I am sure it (4x4/pre-runner) is larger than the 2wd "mini" 5-lug though.

Hope that helps.

It does help, thanks. And yes, it involves being hubcentric with wheel spacers. I need to know if one will fit and the center bore kinda matters.

Ahh, wheel spacers.

The center-bore is 4.25" (108mm). All 6-on-5.5" BCD rims should be the same (chevy, Toyota, etc).

Do you already have the wheel spacers? If not WFO Concepts (http://www.wfoconcepts.com) will custom make any spec wheel spacer to suit your needs.

Again, lots of help, thanks. I'm getting my tires and wheels next week, 35" M/T Radial Claws on M/T Classic II wheels. I just wanted to push my stance out a little, at least 1 1/2" ya know to fill in the TRD fender flares. Thanks again!

Are you going to push it out with more backspacing or wheel spacers?

The wheel spacers.