Si Tranny

is an SI tranny an L3 or are these 2 different transaxles?

L3 is all 88-91 civic manual trannys.

which cable tranny is best?

the si tranny

and the zc

But the Si tranny is the best of choice

Or heres a better one....

Zc trans with SI final drive or

SI trans with ZC final drive.

SI trans with ZC final drive.

SI trans with ZC final drive = DX trans

Si final=4.25
DX final=3.88
ZC final=3.88

Si & DX gears are identical except the final

this is why the ZC transmission with its closer gears than Si but lower final drive is the best choice when combined with Si final

It's the basic 4g tranny info

ahh i had it mixed up.

will Si half shafts fit for L3?

SI trans with ZC final drive = DX trans

Si final=4.25
DX final=3.88
ZC final=3.88

Si & DX gears are identical except the final

this is why the ZC transmission with its closer gears than Si but lower final drive is the best choice when combined with Si final

Also the Si and the ZC have the bigger bearings. Than the DX

i got a new half shaft for my SI but will not go all the way in. ive tried banging the shit out of it and nuttin. but my SI has a L3 tranny. maybe this is why?

Nope i was right...

You can do it both ways.

Also the Si and the ZC have the bigger bearings. Than the DX


I've never had a problem swapping input shafts from Si to DX and so forth, so i dont know the truth in this. possibly the STD and HF have smaller bearings, but Si & DX appear to be identical to me.

Anyone know if the zc tranny uses the same synchros as the Si tranny??