Need Help Disabling Factory Alarm

I have a 95 Chrylser Concorde 3.3V. Problem is this: I had a two-way remote starter alarm put in. Works fine except that first I have to disarm the new alarm then disarm the factory alarm to get into the car without one going off. To use the remote starter I have to do the above procedure then wait for the new alarm to automatically come on before I can remotely start the car. Its a real pain. If anyone knows how I can disable the factory alarm, I would greatly appreciate it. I tried disconnecting the black box under the dash but that didn't work.

Thanx

Hmm, I think that can only be disabled by a Dealer, Don't quote me but I think it's a setting in the Body Control Module that the dealer's scan tool can change.

The disarm in these cars is so easy. Can't fathom the idea that the installer was able to do everything but that@! Anyway, the disarm wire is lt.green/orange 20ga wire and is located in EITHER kick panel. Just a quick - pulse shuts it down.

Thanks I'll try that tomorrow and see what happens