3rd gen springs

Does anyone know of any spring mods for 3rd gen (82-85) celicas? I know there are ground control springs, but they seem pricey. I had an idea of cuting celica supra springs, but I want to avoid cut springs. Also I heard about something that RSX springs fit in 3rd gens, does anyone know about this?

hey, i just got some adjustable coilovers for my 3rd gen..i don't know if the rsx fits, but i got mine from my brothers 95 240sx. he bought obx gravitaional coilovers for his 240 but it didn't fit and i tried it on mine and it fit just right in...the max i got was 2in. and i only got the front done, so not so sure about the back.. it took me 4 hours to get the fronts done...and i'll try the back one when i have the time...

oh shi thanks, it fits? Hmm... when I get around to the springs i'll try it out thanks!

no prob. although i have bad news about the back coilovers, today i tried to put on the back coilovers but then the coilovers where too small....

i see, good info though, thanks again. If it's not too much trouble, could to measure the diameter of the front obx springs you installed?

oh hey, where you from? I know of a place to get good brake rotors.

i haven't had much time to take a look at my car lately but i'll try to get you the measurements and some pics by this weekend...im from marysville cali. where's this place at?? are the brake rotors for the front or the back?

the brake rotors i got are for the front, they are basic brembos but they will do whatever you want to them for no charge. I got my brembos zinc plated, x drilled and slotted for $100 for the pair. The place is in Orange county (southern california), don't know where marysville is, but I think you can get them if you send in a money order, they don't accept credit cards. Their phone # is 714-899-0677. If you want pics of my rotors i can post them if you want.

sure, i'd like some pics of ot the rotors...marysville is located in nor cal...i didn't have the time to take off my coilovers and measure it but i think the diameter is approx. 2 inchs...but i did take some pics..

these aren't really good pics but this was the best i could do for now...