having problems
chplynne2000
09-22-2004, 08:27 PM
no signals or hazard lights working, fuses are good, any ideas?
pind
09-24-2004, 10:03 PM
try replacing the flasher unit. If all signal and hazard lights are not working, this is the most likely culprit
chplynne2000
09-25-2004, 01:26 PM
try replacing the flasher unit. If all signal and hazard lights are not working, this is the most likely culprit
do you have any idea were this is located, I have looked everywhere and can't locate it. I did purchase the flasher unit, but no one can find it. thanks alot, this has saved alot of time
do you have any idea were this is located, I have looked everywhere and can't locate it. I did purchase the flasher unit, but no one can find it. thanks alot, this has saved alot of time
pind
09-25-2004, 09:42 PM
The flasher relay for your Tacoma is located on junction block #1, behind dash, left of steering column. Fuses for the hazards and turn signals are also located on junction block #1.
chplynne2000
09-27-2004, 07:16 PM
The flasher relay for your Tacoma is located on junction block #1, behind dash, left of steering column. Fuses for the hazards and turn signals are also located on junction block #1.
thanks for all your help, but it is not the flasher, I did change it but nothing. Can it possibly be the relay?
thanks again
thanks for all your help, but it is not the flasher, I did change it but nothing. Can it possibly be the relay?
thanks again
Automotive Network, Inc., Copyright ©2026