how do you get this off...

how do I get the Window crank handle of my 90 hatch??

I feel like its gonna break off, if I pull any harder

I got the whole dam door of, except this thing

http://www.binghamtonlife.com/manual/2gsm/images/91-20-3.jpg

i hope that helps

there is a little metal clip on the inside of it.....it runs flush with the door pannel....you need a door clip remover....or a flat head screwdriver will work

damn you ami.....beating me to it

-Brad

damn you ami.....beating me to it

-Brad
it's what i do :evillol:

dam, that looks easy to get off, BUT DAM HARD to get back on???

Nah, its really easy to put on really. To take in off, is really easy too. Just turn the handle until you can see the bottom of the clip, then put a flathead on one of the sides of the clip and then turn the handle. Clip should fall out. To put it back on, get the clip lined up, and then use your flathead to push it back in. I've done it multible times on my cars.

Actually to get it back on you can put the clip on the handle before you do anything. Then just slap the combo on there, the clip automatically sets itself.

Hey, I did a really neat trick the other day that I found from a junked 4-door. I took the handles off it cause it had the silver circle in the middle and put it on my hatchback. It looks goods and is a great little mod to do. Makes it look a little fancier.

Oh and when you put the handle back on, make sure that you put back in on the same angle you took it off of cause then your handles on both sides will match each other when both closed and opened window.

Actually to get it back on you can put the clip on the handle before you do anything. Then just slap the combo on there, the clip automatically sets itself.

good to know. Thanks!