Fan Belt slipping

ok i have a 94 LX with the 4.6L and when it kicks down when im driven the fan belt slips. Two things is that normal, if not what do i need to do to fix it. And also its a new belt.

Is it an aftermarket belt?

They tend splip a lot.

If it is aftermarket try using a Ford motor company belt.

its a car quest belt

I would try the ford belt if you want to stop the noise.

ok about how much do those run?

I'm not sure.

I would guess around $25. I'll ask tomorrow while I'm at work. I work at a Ford dealership.

hey could you price a shift knob for me my button broke and there isnt a local ford dealer to speak of around here

I'll ask tomorrow while I'm at work. I work at a Ford dealership.

MOTHER OF GOD, MAN!

Ill Get Back To You With My Christmas List!

it could also be your tensioner pully causing the belt to slip...and if i remember correctly from when i replaced my belt, to get a ford motor craft belt its gunna be around 45-50 bucks.

The belt price Jworm stated is around the norm it does vary from dealer to dealer depending on how much they mark up.

With the shifter I suggest going aftermarket because the factory shifter is over a 100 bucks, I believe it is around 150.

hang on let me pick my jaw up off the floor. okay do you know af any sites that carry aftermarket shifters for that.
In brief does any body know how it comes off cause ill put a rubber band around it and call it good if its really high maybe.

There is a little pin in the shifter handle facing towards the dash. Parts stores carry them.

Try a junkyard.

at the junkyards round here you have to buy the whole transmission and which pparts stores autozone dosent have them from what i have seen

http://www.cardomain.com/memberpage/568014

When you get here go to page 2. This is what they look like.

ok where is the overdrive button

I had to custom make an overdrive button. Mine is in is in the place where the ash try used to be. You'll need a push button switch.