Help with cold air intake

I just got my cold air intake in today and i was wondering what this piece is. it looks like another spot to hook up a breather. i will give ling to pic i just got hosted.

http://img40.exs.cx/img40/1865/untitled653.jpg

that is not the actual photo of the intake. they juss put the same one over and over sometimes. and if it is the actual picture......... u got the wrong one.

nope i got that one with that wierd thing sticking out of the pipe that i have no idea of what it hooks up to

oh well best thing is return it. or juss close it up with a plug. it wont do no harm. did it fit correctly in your car?

That goes to the valve cover, there is a rubber pipe that connects to the intake and VC. You do not need to use it, I plugged both holes with breathers
Edit>> Or not, does that long pipe connect to the smaller one, so that would make that hole on the long pipe closer to the front of the car?

yea one of them goes to the valve cover but theres 2.

it fits in the car perfectly but the smaller pipe that ccame with the kit had a whole in it that went to the the breather wich was hocked up with small blue hose in picture but the ohter whole in the bigger pipe has nothing to hook up to maybe ishould just plug it up or not i dont know need help tho i want to install it tommorw. I took it out of my car after i noticed that that whole had nothing to hook up to so i know thw intake will fit just fine but i was afraid dirt and other stuff would go into the whole causing problems.

hey ashah you should plug the hole on the pipe since its after the mas. with a breather it just lets in air that the mas cant track

cbell i bet its a hydrolock protection thing if it isnt i can tell you how to make it one. just put a small breather filter on it and since its up higher for your intake to suck in water it would have tio have water all the way up over that hole. kinda like trying to drink through a cracked straw. just make sure that you mount your mas after it

where can i get another breather

Don't have a MAS, 2g NT uses a MAP sensor

You can get a breather at autozone for $10 in a variety of colors :wink:

sorry i didnt know you were nt.

so what your saying is all i need is another breather to plug up the other whole

exactly :biggrin:

you can get a breather or just plug the whole if youd like.

one more question guys what is the little black rubber strap thing that comes with the cold air intake it is right next to the blue hose in the picture.

i have another question guys and i would like an anwser to the question abov this thread if anyone knows what it is. I was wondering how can i put the mounting brakcets from the intake to the car can i screw tthe brackets directly into the intake pipe or should i use some type of adhiesive.

put the black rubber strap around the pipe then put the screw through the ends of the strap into the body of the car

I have that little thingy too on my intake. Dunno what it goes to, but it plugs into someting, just a little rubber hose. I could post pic?