PCV Valve

Where would it be on a 95 Cav 2.2?

should be in the valve cover.

A hose will go from the pcv valve in the valve cover to the intake.

Very easy to find and should be replaced.

haha I'll look very closely ;) thanks BlazerLT

No problem.

Is the hose connecting from the intake to the collector box supposed to have a vacuum on it?? I have a 95 2.3 Z24 and it has a vacuum leak below the PCV sensor. I was going to replace the hose when I quickly realized that there was a copper coil inside. Can you just simply replace the hose around it??

Collector box?

PCV Sensor? wtf?

There is a hose running from a small black plastic box located in the front of my engine aboce my intake. From this box on the right is a small hose that runs down to the intake manifold. The is a short section of hose the an electronic sensor then another secion of hose connecting it into the manifold. I talked to a Chevy dealer today, they looked at it and told me this was my pcv valve? It has a split in the hose and has a vacuum leak. Is it possible to just replace the rubber hose around this copper wire? The Chevrolet part number is 552. If that helps anyone. I'm obviously a newbie at this, what is the biggest bang for my buck in performance parts. I need all the help I can. Sorry guys.....

Can you take a picture of this and show us?