Belts for ZC?
Posey88cvic4dr
09-13-2004, 11:32 PM
Doing my swap tomorrow and I am going to get new belts. Just to check, I buy belts for the 88-89 teg, right? If not let me know, if so, just nod in agreement..... :iceslolan
I should have pics up soon....
Thanks
I should have pics up soon....
Thanks
CRXsiZCpa
09-14-2004, 01:11 AM
Timing belt, Part no. 14400-PK2-004, same as 88 Prelude
1PhatCX
09-14-2004, 09:47 AM
alt belt is same as 88-91 civic i believe, i'll find that out when i finally finish my swap :D
viper_2_4
09-14-2004, 02:35 PM
ya, I am pretty sure the alt. and alt belt are the same (I tried to put a DOHC ZC one on my car, the alt terned out to be bad, probably because it had been sitting outside a friends house for a few months or something).....
sastanley
09-14-2004, 03:15 PM
the accessory belts are from a 88-91 Civic...since the accessories bolt to the same place. As noted above, the timing belt is an '88 Prelude 2.0 Si - if you decide to do the timing belt (which you should unless you know the condition of the existing belt, you should also spend the $35 and do the water pump too...esp. if the engine's been sitting, the seal in the pump likes to go bad, then you have to take all that stuff off to do it anyway. the proper pump is a '91 Civic/CRX water pump
1PhatCX
09-14-2004, 04:34 PM
speaking of ZC belts... i just got my timing belt today! :D
oredered it off of e-bay for like 11 bux american :D
oredered it off of e-bay for like 11 bux american :D
RedLineZO6
09-14-2004, 08:40 PM
I have a quick question about the zc...
I wanna put one into my 90 dx, will I have clearance problems with the valve cover? I want to get a carbon fiber hood, but I wanna know if I'll need to get the ZC hood. When searching for parts out of a magazine that only has years and models and not engine codes, would i be looking for parts for a 88-9 integra? cuz I read somewhere something about crx as well?
I wanna put one into my 90 dx, will I have clearance problems with the valve cover? I want to get a carbon fiber hood, but I wanna know if I'll need to get the ZC hood. When searching for parts out of a magazine that only has years and models and not engine codes, would i be looking for parts for a 88-9 integra? cuz I read somewhere something about crx as well?
Automotive Network, Inc., Copyright ©2026
