Computer Cam

Have a 1990 1500 350 auto with shorty headers and 3 inch exhaust. I want to put in a cam and dont know if I have to stay with a comp cam or can I use something else. I seen some of the ones listed for Towing close in lift and duration as the comp cams. Any help would be app.

I've used as big as a summit K1103 Cam without changing the Prom or Injectors. It is a good cam to work with stock valve train etc. That's probably as big as you want to go with stock components. Even the k1102 is a good choice, both are mild but without modifying other components in the engine you'll just be throwing away fuel $$. By the way I've used many different cam manufacturers. EX. The summit cams VS Edelbrock cams. I degree in every cam. Every Summit cam has been dead on or within a fraction of a degree between lobes. The last Edelbrock cam I installed was 8°s rearded. I used an Edelbrock timing set too. I had to turn the crank gear and when rechecked it was still 2°s retarded. My point: Don't spend more for the name because sometimes the name isn't all it's cracked up to be. Good luck with your cam swap.

I've used as big as a summit K1103 Cam without changing the Prom or Injectors. It is a good cam to work with stock valve train etc. That's probably as big as you want to go with stock components. Even the k1102 is a good choice, both are mild but without modifying other components in the engine you'll just be throwing away fuel $$. By the way I've used many different cam manufacturers. EX. The summit cams VS Edelbrock cams. I degree in every cam. Every Summit cam has been dead on or within a fraction of a degree between lobes. The last Edelbrock cam I installed was 8°s rearded. I used an Edelbrock timing set too. I had to turn the crank gear and when rechecked it was still 2°s retarded. My point: Don't spend more for the name because sometimes the name isn't all it's cracked up to be. Good luck with your cam swap.
Thanks for the help. Ive Used Summit Cams Before and had good luck.Just didnt want to screw the Computer Up. Thanks Again!