Need New Motor

Hey everyone, I have an 89 Integra D16A1 m/t. I am trying to find a B16A1 for a swap and i'm trying to spend as little money as possible. If anyone knows where I can get a cheap B16A1 from any help would be greatly appreciated. If not a B16A1 a D16A1. Thanx again.
TJ

Cant help you there, but I'm selling a B18C1 for $1,500. I live in S.C. if your interested.

https://passwordjdm.com/index.php?page=shop/flypage&product_id=72&category_id=engineswaps
$1399, cheapest full swap I've seen around.

Rating, wat condition is ur B18C1 in? How many miles are on it? And are you selling just the engine or the whole package? The last thing I have to ask is would it bolt up with my car or would I have to make it fit, do you know? Thanks for the info. Also thanx civicspoon for the site.

The B18C1 is in excellent running condition. Has around 110k miles. Its just the motor im selling, no tranny, no ecu, no mounts. If your trying to find a b16a motor to swap in, you would have to do the same process with the B18C1.

What I am selling is a B18C1 Motor for $1,500.
Items included for free are:
I do have reciepts of purchase if needed.

These are not pre installed.

Brand New Poly and Aluminum Motor Mounts $200 Value
OBX Cam Gears $100 Value

These were removed during the motor pulling process.

ACT Stage 2 Turbo Clutch $460 Value
OEM Intake Manafold
OEM Flywheel
OEM Header
OEM Oil Pan
OEM Distributor
OEM Spark Plug Wires
OEM Spark Plug Cover

And anything extra I can find laying around here for that motor.

Get a use LS motor and 5-Speed trans. Swap in a light flywheel, and race clutch. Drop the engine in. Install a cylinder brace, block girdle and quality head gasket. Then slap on a Drag turbo kit and be done with it.

Should the LS engine go, you can pick another up cheap and swap the turbo on it.