lancer/FTO hibrid
hendo
09-09-2004, 03:31 AM
hay people i am thinking of putting a FTO engine in my 2000 model lancer and am just wondering where i cane get one from and for how much?
Moppie
09-12-2004, 04:27 AM
There were V6 lancers sold in Japan (I don't know where in the world you are, but the JDM Lancer is the US Mirage, the US Lancer is the JDM Cedia), your best bet would be to get a JDM V6 Lancer front cut. That way you will get the engine mounts etc that should fit your lancer a lot better than the FTO set up.
However, note, depending on where in the world you are the RHD and LHD chassis differed quite considerably year to year, and the job may be either very simple, or impossibly expensive.
However, note, depending on where in the world you are the RHD and LHD chassis differed quite considerably year to year, and the job may be either very simple, or impossibly expensive.
hendo
09-14-2004, 02:55 AM
thanks for the reply, by the way what is the power output like on the JDM lancer?
Over here in Australia the 96 to 2000 model lancer coupes and the little hatch back/mirages have the same front end.
Over here in Australia the 96 to 2000 model lancer coupes and the little hatch back/mirages have the same front end.
Automotive Network, Inc., Copyright ©2026
