my 96 wont program the remote

i searched all the forums for the info on programming the remote but none of them are working...

the worst part is my radio quit working (no the fuse isnt blown) and my climate control comes on with the key even if you turn it off before hand...

i know my car has keyless entry because when my buddy sold the car it had the remotes but when he repossed it he didnt get them back...

does anybody have any idea what i did wrong?

Don't know if the Climate Control uses a memory feed (Similar to the Radio to keep the time and presets) to keep the mode settings or not, try checking the Fuse for the Cigarette Lighter and see if it's blown as that is generally on the same circuit for the Radio Memory.

i searched all the forums for the info on programming the remote but none of them are working...

the worst part is my radio quit working (no the fuse isnt blown) and my climate control comes on with the key even if you turn it off before hand...

i know my car has keyless entry because when my buddy sold the car it had the remotes but when he repossed it he didnt get them back...

does anybody have any idea what i did wrong?

Dont know what ya did wrong cause dont know what ya did, but.....

Jump pin 1 of the OBD II connector to ground
locks will cycle
Press any button on the remote
locks will cycle
press any button on next remote
locks will cycle
Remove jumper

Only 2 remotes can be programmed to a car

do you have to turn the key on?

and do you ground it to the frame?

and pin #1 would be the top left correct?