w00t

well boys, i'm now officially a part of the Z family! picked me up a "beater" 86 n/a 300zx today. approx 159k miles on it, engine runs like new. altho, in light of all this, she needs some work done to her.... second gear isn't happy at all, she grinds if you try and shift into it with the rpm's over 1500, i'm thinking the syncro's are done for, the brake light's on (one on the dash) i'm thinking that's cause the left rear brake is slightly gripping on the rotor, something to do with the e-brake, hood's got a fair dint in it, nothing that won't pop out real easy, tiny bit of rust here and there, but for $922 us i'd say i got a pretty goooood deal, didn't get a key for the t tops, any idea how to get those guys open? need the master key or something? i'm not too sure why i didn't get the master key, but oh well.... any questions or comment, i'll be damn happy to answer :grinyes:

Welcome my brother...

If you do not already know... The Supposed 'Zed Community' is a Death Cult set for Armegedon.

Now watch the pretty spinning Z emblem... Watch... Watch...

You will drive your car into crowds... You will drive your car into crowds... *random person enters the room* Uhhhh... I mean... Welcome to our wonderful community! Good day now! :D

-Wes

Well Wes was smoking crack, the other kids were learning math. But thats a seperate issue.

Check your brake fluid level, 9 out of 10 times thats why you'll get a dash light.

The grind into 2nd is probably from the previous owner jamming the gears at high rpms. Take it easy on the shifts and it shouldn't be a problem.

I had a problem with my E brake in the 240 that sounded familar. The e brake on it used a rachet system with a threaded drum that screwed out to put pressure on the rotor. Somehow the drum had screwed all the way out and was lodged against the rotor. Had to buy a rebuild caliper and a new rotor but it was like 300 bucks total so no big deal.

Yea thats it... Crack :D

*murmors* Drive fast... Into a crowd...

-Wes

thats awesome dude, welcome... but hey all this talk of e brakes reminds me to ask about that..mine has very little tension on it, not ebnough to actually keep the car from rolling, and i just changed the pads so its not that....??? im new to this, so if anyone can help me out on how to adjust it id be much apreciated...thanks

Z32s don't use the rear disc brakes for the e brake. They have a small drum brake inboard of the discs that hold the car in place. Probably the drum brakes need new linings or perhaps its just a simple matter of adjustment.

Heres a FAQ on ebrake adjustment: http://twinturbo.net/ttnetfaq/FAQpages/prknbrake.html

thanks alot, thats wxactly what i thought, and then some mechanic told me that the ebrake still just used the pads...then i told him to look at the brand new pads as towhich he didnt reply, but thank you, ill look at that

well boys, i'm now officially a part of the Z family! picked me up a "beater" 86 n/a 300zx today. approx 159k miles on it, engine runs like new. altho, in light of all this, she needs some work done to her.... second gear isn't happy at all, she grinds if you try and shift into it with the rpm's over 1500, i'm thinking the syncro's are done for, the brake light's on (one on the dash) i'm thinking that's cause the left rear brake is slightly gripping on the rotor, something to do with the e-brake, hood's got a fair dint in it, nothing that won't pop out real easy, tiny bit of rust here and there, but for $922 us i'd say i got a pretty goooood deal, didn't get a key for the t tops, any idea how to get those guys open? need the master key or something? i'm not too sure why i didn't get the master key, but oh well.... any questions or comment, i'll be damn happy to answer :grinyes:

Rock on...you got a Z31...good for you! If the car's been taken care of even remotely well, it'll go for another 159K.

Second gear issue: I wouldn't worry about it too much, either. My beater Celica does that cuz the synchro is shot...it will even pop out of gear if you let off the gas in second gear...so I hold onto it...:p Just take it easy on the Nascar style speed shifting.

Brake light: Add brake fluid. Little reseviour [sp.] right in front of the firewall on the driver's side. When you add it, see if you notice it coming out anywhere...I had a leaking caliper on my old 300 and didn't notice it until I noticed my rim looked wet...it was brake fluid. FYI...brake fluid cleans rims up VERY well.

You don't need a key to get the T-tops out unless someone locked it. You could probably get a replacement key from courtesy nissan if it is in fact locked, but I've never looked. You just have to push the little sliding thing up and pull on the handle. If it won't budge, it's probably locked. First few times taking them in or out is pretty tricky...I've gotten to the point where I can take them out sitting at a stop light without taking my seat belt off... :biggrin:

brake light went off.... but i gots a story for y'all!!! gather round!
uh yeah anyway.... ok, so the drivers side doesn't lock... no big deal, every time you open the door after driving for a while or attempting to lock it the alarm goes off, i'll get it fixed when i get the car back to k-town and i have a nice warm garage to work in, Anyway... important part of the story, so i'm moving the car from round back to up front of the grandparents house, so i get up, park the car, open the door, alarm goes off... whatever, hurredly get out, go to *unlock* the door which disarms it stick the key in, or so i thought... go to turn it, and come away with the end of the key in my hand, about a third of the other key sitting in the lock... so i run swearing into the house to grab a tool to pull the rest of the key out, pull it out, wait however many min. till the alarm stops going off, call a locksmith... locksmith makes a few keys and goes away.... it was awesome only having one key for the car... don't have the master key anymore, the previous owner musta lost it somewhere or still has it.. (got the car from an auction so they're unable to give us the name of the seller according to some privacy act) anyway, i just hope i can make the 8 hour drive home without pulling a broke as ****.... is there any quick easy fix to unbind that left rear brake? smells pretty funny after driving a while, needs new brake rotors, or maybe just to turn these ones.

nother funny story concerning the transmission issue.... anyway, my dad goes to take it for a drive and i forgot to tell him to take it easy going into second.... anyway, as i see him driving away, i remember i forgot to tell him about it, so just as i hear the gas let off, i hear this really loud KKKKKKKKKKTTTTTTTTT..."summbitch!!!" i had to have a laugh

oh, and i added some brake fluid, light went off like you guys said, thx ;)

ok, so the drivers side doesn't lock... no big deal, every time you open the door after driving for a while or attempting to lock it the alarm goes off

I remember learning REAAAAAAAL FAST how the alarm works when I got my first 300. I didn't even know it HAD an alarm until I opened my driver's door after leaving work the night I got it. The locks are really cool...if you just push it locked then close the door, it'll bump the lock open so you can't lock the keys in the car, but it'll still arm the alarm. This is why my alarm went off that night.

You mean the driver's door doesn't UNlock? If it didn't lock, the alarm would never get activated to begin with. Even if it didn't lock, I don't think the alarm would go off every time you open the door until the end of time. Sounds a little odd.

LOL.......you said "sumbitch"........and *I* live in Kenfucky....lol...

i just hope i can make the 8 hour drive home without pulling a broke as ****....


HEY YOU KNOW WHAT! SCREW YOU!








:D Anyway sounds like the worst that can happen is you have to get a caliper and rotor for the affected corner. Not that bad. If it smells like burnt brakes then thats probably the issue.

no no, it's permanently UNlocked for the time being, so it won't lock
alright what i think is going on with the lock is, it's going just far enough to hit the "locked" arming switch for the alarm, but not actually locking, like there's a piece of something broken off in there preventing the rod from going all the way and enguaging(sp?) the lock

yeeeees llz, those are called dummy locks! they help dummies like you to not lock the keys in your car:biggrin: just playin man :lol:

any idea what i could do to fix the transmission... second gear is kind of important.... you know, if i ever wanna... go fast off the line ;)

Look around, you can probably get a rebuilt trans for a couple hundred bucks. Alot easier then getting yours rebuilt (which is what it needs). Alot cheaper too.

what sorta transmissions would bolt up to my beast, would it have to be a z31 n/a tranny? or could it be say... z32 n/a....
as for getting my tranny rebuilt, why would it be more difficult than finding a new one.... where i live, there aren't many salvage yards, nor 300zx's, taking it to nissan would cost an arm and a leg, so i'm thinking a reputable transmission shop?
on a side note, i ordered a catalogue from victoria british about a week ago, hopefully it'll have arrived by now... i doubt they'd have anything in there transmission wise eh?

Congrats, Delerious! Welcome to the cul-... err... family! Post pix soon!

wooohooo! she made it home! now all i need is a new transmission and to get the rotors turned.... anyone know how to get rid of rust? :biggrin:

Where is the rust at? How bad is it?

ok, well, we got every side, the roof, and uh, probably a lot underneath... lol, just little spots here and there... i'm thinking sand and repaint with some touch up and clear coat... won't look as good, but it'll look better than rust!... oh anyone know what that fan like exhaling sound is that runs for like 5-10 min after you shut the car off?

Bondo!!!!!!!!!!!!!!!!!!!!!

There's a fan that runs for a while after you turn the car off. My old 2+2 did that, but my current Z31T doesn't...go figure...

As for the rust, if it's just surface rust, it's no problem. Sandy sandy, get some rust sealant stuff and spray it on there, painty painty...good as new. If it's all the way through the panel, it's a little tougher...if you can't replace the panel, I hope you can weld...:p

my buddy's a pro welder, w00t... most of it's surface rust, nothing deep, just bubblies and such of the paint... gotta find a big ass can of touch up paint tho, she needs some serious paint work.... 18 yr old paint just doesn't seem to hold up to pebbles... think i should grab a thing of clear coat to go over the touch up stuff?

Probably should just sand it down and get the whole car repainted. Doesn't have to be anything fancy, just some decent color. Alot easier then trying to patch work it.

hell of a lot more expensive tho

Doesn't have to be. Patching half the car and trying to get it alteast sort of one color would be almost as expensive.

yeah but be sure you spend the money to do it right. not one of those crappy $600 maaco jobs. I learned from experience.

I was gunna say that, too. Just sand it all down...this will take off a lot of the rust. Fix what rust is left, then primer it. You should be able to do that stuff yourself...I don't believe it's too difficult. That will save you a lot of money. Then take it to get it painted...somewhere good, too...that will last you for probably as long as you have the car and won't cost you TOO much money.

they're just small patches mostly in out of the way places, shouldn't be too difficult if i get the right paint from the dealership, at $5 per small tube of paint :banghead:

That works if the paint in general isn't too bad. If it's a little rough, I'd do it over...probably what I'm gunna do to mine.

where do i go to check if the recall has been done on my injectors? i know i need the vin, just not sure what to do

Primer that yatch!!!! There is nothing like a completly primered car! Flat black or grey perferbly!

Primer that yatch!!!! There is nothing like a completly primered car! Flat black or grey perferbly!

1viadrft = "Applevalley, California"


Ohhhh, that explains alot.

as for the primer

YOU PUTZ

What is wrong with where I live? I'm not all ghetto! LoL Seriously? I live close by where Roy Rogers lived... doctors live up here too! And they all roll in primered Benz'....

Apple Valley? Cali? Don't you be dissin' Cali, Willis. If it's not in Cali, I don't care...:p

Just call a Nissan dealer up with your vin...they'll tell you if the recall has been done in a min. Probably has been.