Tail Light Problem Need Help

The car went in for paint with all the electrical working. When it cam out the tail lights and dash lights didn't work. The brake lights and turn signals worked. Blown fuse. Cleaned all the bulb sockets on the rear and then they worked. Except the left turn signal indicator on the dash stayed lit with the turn signal in the off position. Turned the lights off and then back on and the fuse blew.

Do not know what to try next. Any help is greatly appreciated.

Thanks
Bob

sounds like it could be something in the switch

check all the grounds, dont just look at then , remove them and clean the the area where they mount and reinstall them, and check all the wires from the firewall to the lights to make sure none of them got pinched and making a direct short. also make sure the bulbs are in the scokets the right way

Wade