Prelude gurus answer me this one please.....
BoosterSH
02-08-2002, 12:57 PM
Need to know the following info on 98 SH:
What ft/lbs the bolts on the headers to engine block need to be tourqued too?
Whats the best manual transmission oil to use? Im thinking Genuwine Honda but if there is something better please tell me.
Damn im hungry.......:bloated:
What ft/lbs the bolts on the headers to engine block need to be tourqued too?
Whats the best manual transmission oil to use? Im thinking Genuwine Honda but if there is something better please tell me.
Damn im hungry.......:bloated:
drift
02-08-2002, 05:15 PM
as for the first question, you're better off getting yourself a manual.
as for tranny oil, i prefer Redline MTF... but i need to put some on order
as for tranny oil, i prefer Redline MTF... but i need to put some on order
95vteclude
02-08-2002, 07:01 PM
i'm not sure on the first.. but i've heard very good things about the redline mtf...
fritz_269
02-11-2002, 09:28 PM
Originally posted by BoosterSH
Need to know the following info on 98 SH:
What ft/lbs the bolts on the headers to engine block need to be tourqued too?
Whats the best manual transmission oil to use? Im thinking Genuwine Honda but if there is something better please tell me.
Three step torque sequence:
39 Nm (29 lb*ft)
69 Nm (51 lb*ft)
98.1 Nm (72.3 lb*ft)
Looking down on top of engine from the front, the torque sequence is as follows:
9-5-1-3-7
8-4-2-6-10
Bolts should be cleaned and oiled - chase block holes with a bottom tap.
Use a new head gasket & make sure the dowel pins are aligned.
Honda MTF is great, and so is Redline MTL. I've called Redline and they do recommend it for the '98 SH.
:cool:
Need to know the following info on 98 SH:
What ft/lbs the bolts on the headers to engine block need to be tourqued too?
Whats the best manual transmission oil to use? Im thinking Genuwine Honda but if there is something better please tell me.
Three step torque sequence:
39 Nm (29 lb*ft)
69 Nm (51 lb*ft)
98.1 Nm (72.3 lb*ft)
Looking down on top of engine from the front, the torque sequence is as follows:
9-5-1-3-7
8-4-2-6-10
Bolts should be cleaned and oiled - chase block holes with a bottom tap.
Use a new head gasket & make sure the dowel pins are aligned.
Honda MTF is great, and so is Redline MTL. I've called Redline and they do recommend it for the '98 SH.
:cool:
BoosterSH
02-12-2002, 12:45 PM
Originally posted by fritz_269
Three step torque sequence:
39 Nm (29 lb*ft)
69 Nm (51 lb*ft)
98.1 Nm (72.3 lb*ft)
Looking down on top of engine from the front, the torque sequence is as follows:
9-5-1-3-7
8-4-2-6-10
Bolts should be cleaned and oiled - chase block holes with a bottom tap.
Use a new head gasket & make sure the dowel pins are aligned.
Honda MTF is great, and so is Redline MTL. I've called Redline and they do recommend it for the '98 SH.
:cool:
Fritz......you da man!!!:D
Three step torque sequence:
39 Nm (29 lb*ft)
69 Nm (51 lb*ft)
98.1 Nm (72.3 lb*ft)
Looking down on top of engine from the front, the torque sequence is as follows:
9-5-1-3-7
8-4-2-6-10
Bolts should be cleaned and oiled - chase block holes with a bottom tap.
Use a new head gasket & make sure the dowel pins are aligned.
Honda MTF is great, and so is Redline MTL. I've called Redline and they do recommend it for the '98 SH.
:cool:
Fritz......you da man!!!:D
Automotive Network, Inc., Copyright ©2025