Stop the vibration?

Different people have told me different stuff on how to stop the trunk from rattling because of the vibrations but I was wondering if anyone here has any fast, easy, cheap methods of stopping the extra noise on the outside.

Dynamat is the traditional route. It's only cheap if you know someone that works at best buy and can hook you up. Otherwise if you have a lot to dynamat, it can get expensive.

Dynamat is the same as any other deadening material edead, second skin, etc...

Also dynamat cost a ton more

All I did was double up on my carpet, (basically I got new thicker carpet put on over the factory molded one) and a custom made panel under the trunk lid.
http://us.f2.yahoofs.com/bc/40fb505e_747c/bc/The+Darkness/dub7.jpg?bfI9_MBB55wAaw1k
I did ask for dynomat, but I don't think they used any. I don't know what's wrapped under it, besides the old carpet, (maybe it is some kind deadening too), but the only parts that rattle now are my tail lights and if anyone got some ideas other than glue for those I'll appreciate it...
They glue thing don't work once it really get going...

anyone tried the stuff that sells on ebay, such as B-Quiet, Brown Bread, FatMat?

fatmat sucks

i like secondskin personally but I've heard good things about brownbread, b-quiet, rammat, and edead

All I did was double up on my carpet, (basically I got new thicker carpet put on over the factory molded one) and a custom made panel under the trunk lid.
http://us.f2.yahoofs.com/bc/40fb505e_747c/bc/The+Darkness/dub7.jpg?bfI9_MBB55wAaw1k
I did ask for dynomat, but I don't think they used any. I don't know what's wrapped under it, besides the old carpet, (maybe it is some kind deadening too), but the only parts that rattle now are my tail lights and if anyone got some ideas other than glue for those I'll appreciate it...
They glue thing don't work once it really get going...

Can you fit any matting between the lights and the doors?

Where can i find some Second Skin product? Most of what I see is all dynamat.

www.secondskinaudio.com

Can you fit any matting between the lights and the doors?

the lights and the doors? I don't understand what you're asking...

opps... between the lights and the car

see my flik in my avatar...I'm looking for some crystal lenses like those for the tail lights...
when I find and install them I'm goin't try a gasket like cut of matting around the edges and see how that work out...
thanx, that was a good idea...