Replacing fuel pump

Hey all,

My '96 S10's fuel pump died. Knowing this is an in-tank pump, is it easier to remove the bed, or to drop the tank when replacing the pump? Any other suggestions?

Thanks in advance,
Ben

well i took off the bed on mine and it was simple, took about 2 hour. just remember to take the fuel intake coupling off, 3 screws. 8 bolts for the bed and the wiring harness in the back good luck hope this helps.

I agree.Take the bed off.Might seem like alot of work but in fact much easier.

Thank you both for the advice...I was not sure if there would be a cross-member or something blocking the fuel pump. It would have sucked ripping the bed off only to find that out!

Thanks again,
Ben