Mods?
andyeagle19
08-28-2004, 11:43 AM
I was just looking for any inputs on modifications. I have some $ to work with now and I am stumped as to what I should do next. Here are my mods so far;
Apexi N1 exhaust(free-flowing/3in)
Apexi intake
gutted primary cat(no secondary)
ct26 turbo(jdm)
blitz bov
greddy profec b(set to 1bar)
1994 trd lsd w/1994 axles
act race clutch, and
smt6 fuel computer(debating install due to wiring)
I think that about covers it. The car is basically stock right now, but looking to change that soon! All suggestions are greatly appreciated. Thanks
Sab
Apexi N1 exhaust(free-flowing/3in)
Apexi intake
gutted primary cat(no secondary)
ct26 turbo(jdm)
blitz bov
greddy profec b(set to 1bar)
1994 trd lsd w/1994 axles
act race clutch, and
smt6 fuel computer(debating install due to wiring)
I think that about covers it. The car is basically stock right now, but looking to change that soon! All suggestions are greatly appreciated. Thanks
Sab
ac427cpe
08-28-2004, 12:27 PM
change the bov back to the bpv
get a downpipe
:D
but seriously... the best modification you can ever do to make your car go faster: take a driver's school.
find out what's near you, or see if an evolution school will be in a city near you.
get a downpipe
:D
but seriously... the best modification you can ever do to make your car go faster: take a driver's school.
find out what's near you, or see if an evolution school will be in a city near you.
andyeagle19
08-28-2004, 02:58 PM
I don't want to go the route of changing the bov back to the stock setup. Maybe later though. For the downpipe, where does it go? I have never really been too clear on this. Does it go right after the turbo before the primary cat? Cuz other than that there are norestrictions in my exhaust except a canister muffler at the end of the pipe. Thanks
MR2Driver
08-29-2004, 07:29 AM
Intercooler
andyeagle19
08-29-2004, 10:46 AM
yeah saw the other site!! Thanks though!
JekylandHyde
08-30-2004, 04:54 AM
Intercooler
TRD2000
08-30-2004, 10:23 PM
Hey Hyde I'm Tossing Up Intercoolers ....
Greddy Or Spearco
Both Very Similar Size, Spearco Is Bar And Plate, Greddy Tube/fin
Greddy Or Spearco
Both Very Similar Size, Spearco Is Bar And Plate, Greddy Tube/fin
ac427cpe
08-31-2004, 02:36 AM
air to water ;) custom w/ spearco core
andyeagle19
09-02-2004, 12:08 AM
Thanks for all responses. I will probably getting an i/c shortly here. What is your recommended "top" brand?? Thanks again
appleburger
09-02-2004, 01:51 PM
the downpipe goes from your turbo and eliminates the primary cat.
TRD2000
09-02-2004, 02:20 PM
As I Said, I'd Go For Either The Greddy/trust Or The Spearco Kit.
andyeagle19
09-03-2004, 09:49 AM
As I Said, I'd Go For Either The Greddy/trust Or The Spearco Kit.
When did you say that? Thanks though.
When did you say that? Thanks though.
Automotive Network, Inc., Copyright ©2026
