wiper fix

Hey guys,
I am looking to fix the wipers on my 98 Zr2 and I know the problem, its the sodering on the pulse-motor-module-chipy-thingy (whatever the name for the stupid part it). I am just looking for maybe some pics of someone who has done it to make sure I do it right. I have been poking around the internet to get all the info I can on this before I tear into it and start meltin stuff that shouldn't be, crossin wires... you know what I mean. I'm pretty confident on what to do, I just want to make sure of which points to soder on that chip. Thanks for any help.

its called the pulse board,located by wiper motor .U will see 3 torx screws remove them ( try to use magnetic screw driver so u dont drop screws) remove black cover its held on by sealant pry evenly . disconect wires from pulse board remove board .turn board over u will see 5 soldered tips of wires right in line with the electrical connection on the board .if u take a magnifying glass u will see the solder is broke because of vibration and bad workmanship resolder and reinstal part.i done this on my 98 s10 havent had any problems took about 45min to do .