Help needed ASAP!!!
1PhatCX
08-21-2004, 08:56 PM
I need somewhere that shows all the torque specs and sequences for the DOHC ZC, the bottom ends together but not torqued yet and the zc resource is down so i cant get it from there! :(
itechengineers
08-23-2004, 06:20 AM
my suggestion is, if you cant find the proper torque specs.... use the default specs for d16 block and within that general area... torque the block.
just dont over torque = i know someone who did a head without a torque wrench and when he finally got one to check the troque the head bolts were over 100.
just dont over torque = i know someone who did a head without a torque wrench and when he finally got one to check the troque the head bolts were over 100.
1PhatCX
08-23-2004, 12:29 PM
my suggestion is, if you cant find the proper torque specs.... use the default specs for d16 block and within that general area... torque the block.
just dont over torque = i know someone who did a head without a torque wrench and when he finally got one to check the troque the head bolts were over 100.
alright, well the ZC resource is back up and i got the torque specs. like 49 ft.lbs for the main and 28 for the connecting rod caps
just dont over torque = i know someone who did a head without a torque wrench and when he finally got one to check the troque the head bolts were over 100.
alright, well the ZC resource is back up and i got the torque specs. like 49 ft.lbs for the main and 28 for the connecting rod caps
Automotive Network, Inc., Copyright ©2026