Driving Lights

I have an '04 Sierra 4x4 work truck pkg. I would like to mount driving lights in the bumper. There is a recess area for the lights. How do I get started? I can't find the mounting brackets at any GM parts sites. Is it difficult to wire myself, I'm afraid of all the computer chips, etc, now a days. I would apreciate any advice. Thanks.

I bought after markets for my truck, and put them under the bumper. Easies way to wire them is to run the switch to the dash, and get yourself a power relay (usually in the same isle at the parts store) tap into the low beam power on one side, run the grounds (I used the headlight ground) run the constant to the battery, and boom, your set. reason I used the headlight power is so I dont have to remember to shut them off, also, in some states, they must go out when the high beams come on.