Push Bar & Spotlight Questions

Hi all, I just found myself a 00 CVPI at a pretty good price and relatively low miles. Great interior, runs excellent. The only problems are that the push bumpers were removed, but the brackets are still in place. Does anyone know what model the mounting brackets were for? (see photo below). I'd like to put one back on using the existing pieces if possible. Also, the spotlight is missing the control handle. How difficult is it to replace the entire light? Or would it be easier to find a new handle.

I've been reading up on this forum and there's a wealth of great info. Thanks in advance for the help.

http://pic3.picturetrail.com/VOL15/631045/2375181/63918626.jpg

As for the spotlight, you can get repair parts, much cheaper. Go to Galls.com or some other supplier and check them out.

As for the bumper... if you know what city the car came from, look at one of theirs. Then go to the above listed site and see if you can find one to match.

Worst case, take a close up photo and e-mail it to all of the major supliers... Setina, Rhino, etc.

I would not go much further than that though. Running one with red and/or blues is a felony.

Great advice...didn't know why I didnt think to look that up. No worries, no emergency lights for this vehicle. Thanks for the help.

Good photo of the car. I like those "I said put your head down on the hood" THUMP dents. It sort of gives it character.
Also, I can't see in well due to the tint, but does it still have the cage in it?