spoon engines

hi there ............

i would like if someone could ..........
give me some specs about.......spoon engines and other type of aftermarket.....engines...

what kind of engines are you looking for. If you want to know about civics and other hondas then i can tell you all the specs but i need to know what you are looking for.

Im looking for a high peformance v-tec or spoon engine. anybody got anything.

b16a1 160hp
b16a2 160hp
b18 140hp
b20
h22 200hp
h23
these are all honda v-tech motors.

Originally posted by dumpedhatch
b16a1 160hp
b16a2 160hp
b18 140hp
b20
h22 200hp
h23
these are all honda v-tech motors.
no H in VTEC its not a phone sorry that bother's me.
ok first of what kind of honda are you putting this motor into?
b/c 7gens only fit other 7gen motor's and 1gen RSX motors like the K20A base model and the type-S K20C. Spoon only really deals with selling B series motors and there around 6 g's I'd go with another company that sells motors or look around on the internet or junkyards for motors (its rare to find them in junkyards). Ok now then are you looking for a sigle overhead cam. or a double overhead cam? please note that Vtec is almost worthless without a vtec controller, which does not come with the motor.
ok here's a list of decent motors-
6th gen and below
cvic motors
99-00 Si B16A2 - 160hp @ 7600 rpm
97 + type R B16B - 184hp @ 7800 rpm
92- 95- 96 + Si R 2 & vti B16A - 168hp @ 7800 rpm
90-91 Si R B16A1 - 160hp @ 7600 rpm
89-92 Vti B16A1 - 158hp @ 7600 rpm
89-92 Si R Hatch B16A - 158hp @ 7600 rpm (you can tune early ZC's pretty well also) also the crx si-R and del sol 92 to 96 came with a 168 hp b16a and 94 to 97 the del sol came with an b16a3 with 158 hp.
then there are
the integra motors
97-98 2000 type R B18C5 - 195hp @ 8000 rpm the model of this motor made in japan is 197hp and it goes 95 and up.
97-98 Gsr B18C1 170hp @ 7600 rpm
94-00 Ls / Rs/Gs B18B1 142 @ 6300 rpm
95-97 Si R B18C 178hp @ 7600 rpm
from 92-93 honda made a Gsr B17A1 - with 160hp @ 7600 rpm
then there's the prelude motors
99-01 H22A2 - 200hp @ 7000 rpm
97-98 H22A1 - 195hp @ 7000 rpm
97 + Si R H22A - 200hp @ 6800 rpm
97 + type S H22A - 220hp @ 7200 rpm
92-96 Si / Se H23A1 - 160hp @ 5800 rpm
94-96 Vtec H22A1 - 190hp @ 6800 rpm
92-96 Si F22 - 160hp @ 6000 rpm
92-96 Vtec H22 - 200hp @ 6800 rpm
90-91 Si B21A1 - 140hp @ 5800 rpm
do me a favor and post what kind of car your looking on putting the motor in and some more specifics.

What kinda engine would be best for a 1996 LS integra ? Im kinda on a tight budget too. I dont really have the money for a type r engine:(

Originally posted by Devo2133
What kinda engine would be best for a 1996 LS integra ? Im kinda on a tight budget too. I dont really have the money for a type r engine:(
I think I'd try to work with the LS motor the b18b1 isint a bad motor equipped with a turbo and some other modifications. Or I'd look for a b16a or a2 most prefferably a b18c1 or an h22a1 anything else is going to be rather expensive.

yep, hybrid sol really tore up this trhread, he said it all :D :smoker2:

Originally posted by relientokay
yep, hybrid sol really tore up this trhread, he said it all :D :smoker2: thanx Mr. Obvious :rolleyes:

Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!

Originally posted by carmaster_19
Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!
....

Originally posted by carmaster_19
Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!

:eek7:

GET OFF MY INTERNET!

YOU MAKE MY HEAD HURT!

Originally posted by carmaster_19
Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!

er...ok, if it makes u sleep better at night thinking like that...

dude.....like hybrid said...work with the b18 your ls comes with....too poor for a full ITR engine? why not grab the ITR head(lots cheaper) and slap that bad boy on your existing engine? just a thought....good luck getting an h22 in there though....the intagre chassis is too narrow and it becomes hard to turn...if this is a straight drag car, no problems...but if its a touring car or and everyday driver...Id highly suggest not going the h22 route....

For monsterous speed and under $3000, Try a H22a euro type R Accord motor, 220bhp@7400RPM and 163ft/lb@7200RPM. Spot wielding is required, and new motor mounts. OR>>>>try a B16ZC for under $2500. OR>>> for a real tight budget, find someone with an old honda accord who is willing to sale it for cheap and do an engine swap, 94' accord lx comes with a H22A1 195bhp@7000RPM and Im not quit sure on the torque/ If you really want a fast and unbeatable car go the distance and order a B18C-R longblock, bye the time you have it assembled it will run about $5000. Get back with me, I'll try and help to the best of my knowledge.

Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!


Where do these guys come from????

Where do these guys come from????

What? Didn't you guys hear? He is running 3 Honda Civics with Spoon engines w/ NOS, and a Motec System exhaust. Because Dom, you know he can't lose again...

where do you live? cuz where im from theres no way you can put a h22a in your car for under $3000 unless you steal the engine and put it in your self. how much are you looking to spend? there is alot you can do to that engine you have it all just depends on how much your looking to spend. from the sound of it you cant do an engine swap your self so if your looking to do then go shoping around find prices at diffrent places that do engine swaps. or you can do many mod to the engine you have now.

You guys should list the Torque ratings on them - the S2000 looks good with it's horsepower rating, but it's 162 lb feet of torque don't look so appealing - my mom's buick Regal has more torque with fewer horses.

That's what I'm looking at when I look to get an engine swap for my car - which VTEC engine while stock generates the most torque.

probably the NSX engine? Or the 3.5 liter Odessey-Pilot....
A 4cilynder engine...the 2.4 from the accord CR-V
A 4cyl with torque + hp the h22 euro spec 220 hp 2.2 liter...

I want a DOHC VTEC I4, which rules out the NSX engine and it's lame 217 lb feet of torque (I think that's what the torque is rated at on it) which will allow me to have AC and power steering which also rules out any thing except for a B series engine for my car.

VTEC: Variable Timing and Electronic Control. AKA Variable Valve Control.

Often confused with V-Tec/Vtech/V-tech :)

Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!






OMG where do some of these guys get their info from......imma hurl :puke:

Man Yall people dont know shit about spoon engines! dudes a fully stocked engine comes at about 100 to 150G's no lie also it'll pump out about 400 or more horses. shit im only 13 and i know more about cars than yall... if uzzzz got any questions feel free to ask..


P.S. a spoon engine was made to race not to tour!!


This ain't Gran Turismo boy...A fully equiped spoon civic or integra will run you at most $25,000, including the car....

VTEC: Variable Timing and Electronic Control. AKA Variable Valve Control.

Often confused with V-Tec/Vtech/V-tech :)
alright dude u need u some 17" rims a COLD air intake possibly a turbo or stage 2 turbo and then add a body kit front side skirt and ass end and the brag about your car

alright dude u need u some 17" rims a COLD air intake possibly a turbo or stage 2 turbo and then add a body kit front side skirt and ass end and the brag about your car

you=moron

god what is it with these people? just for old time's sake i looked back through this thread. how f*ckin stupid can some people be?

where do you live? cuz where im from theres no way you can put a h22a in your car for under $3000 unless you steal the engine and put it in your self. how much are you looking to spend? there is alot you can do to that engine you have it all just depends on how much your looking to spend. from the sound of it you cant do an engine swap your self so if your looking to do then go shoping around find prices at diffrent places that do engine swaps. or you can do many mod to the engine you have now.
:smokin:Get a H22a block and put a H23 head on it. It will be cheaper and much faster than a H22a.

yo carmaster i jsut got a set a 20's wit big park bench on my trunk wit dual exhaust and nawsss. shits tight.

carmaster if u could please name me two spoon races cars. and since u have infinite wisdom about automobiles please give me the specific engine code for a 98 Accord LX,VP,SE,EX.

alright dude u need u some 17" rims a COLD air intake possibly a turbo or stage 2 turbo and then add a body kit front side skirt and ass end and the brag about your car

i hope that guy got banned for such a stupid comment like that right???

gee, i don't think i'm really stating the obvious here or *anything*... but some of the people in this thread need a good helping of 'ol Darwin's laws of evolution, hopefully coupled in some way with pavement, and a hilarious news article. :p





if you don't get this, it probably applies to you. ;)

edit: wait, i had an intelligent question also... I've seen that crate engines are coming out for hondas, i don't remember what block/head it was but it looked nice- is it worth it to spend the extra money on a brand-new engine for the "H" ride, or would it be better to rebuild a current engine?
i want to build/own a very strong engine, i'm not sure if i want to do all-motor or FI but i'm open to suggestions, and i'm looking at options.

b16a1 160hp
b16a2 160hp
b18 140hp
b20
h22 200hp
h23
these are all honda v-tech motors.

VTEC NOT VTECH
VTEC = VARIABLE VALVE TIMING AND LIFT ELECTRONIC CONTROL

for 13 yr old..go play poke'mon, you dont belong here

i dont see b18c1 which is 170 stock <--what i run (GSR)
and the b20 which is 190 or 195 stock i think, brain fart

The GSR was listed i nthe post below that on the first page; well the 170hp JDM version anyways. If you're talking about the CRV b20 motor it has 126hp.
Geeko: The crate motors are only for all motor applications, so if you're considering turbo then don't bother. But it'd probably be cheaper to just rebuild than to buy an already built motor. I know I've seen "The Beast" Crate motor that's a built GSR block with 270hp. But it doesn't even say how much it is on their website: http://go.mrgasket.com/pdf/74026G.pdf Page 8.

CivicSpoon: ah, thanks. yeah, i'd kinda like to go all-motor, but i'm not sure. Yeah, the fact that they don't list a price is *scary*... like, the same reason Lambourghini doesn't list prices... if you need to know, you can't afford it!

old old thread...

start a new one if u want to discuss this topic.