confused.....
osucordell
08-15-2004, 07:38 AM
I'm slightly confused about something, all the research that I have done on the 92 camaro rs would suggest that I have a 700-r4 transmission. Now I have asked and have been told on this forum that my 92 rs's tranny is not compatible with a 350 however other research I have done shows the 700-r4 to be compatible. I'm not sure which it is, is it going to work for me on a 350 or not? I currently have the 3.1. If anyone can offer a definite answer it would be greatly appreciated.
NINÅ
08-15-2004, 09:07 AM
I'm slightly confused about something, all the research that ..........................
Yes, it is compatable 305's and 350's came with R4's.
Yes, it is compatable 305's and 350's came with R4's.
4onFloor
08-15-2004, 12:28 PM
i'm not so sure that it will bolt up to a small block. i was at the junk yard the other day getting speedo gears from a 700R4, and this tranny had a real narrow bell housing, the guy told me if was from an S-10. i know the 4.3 and small blocks share the same bell housing pattern but i'm not sure about the 3.1.
Savage Messiah
08-15-2004, 12:47 PM
I think what's confusing you is somethign like what was confusing me a little while back. I have a 4l60e, and so do some z28's.... but putting it the simplest way i can, the v6 and the v8 ones are different lol.
Dober89
08-15-2004, 12:50 PM
Yea the V6 transmissions have a different bell housing than the v8 ones. Your best bet is to find a v8 tranny when you get the 350.
osucordell
08-15-2004, 03:09 PM
ah, ok
Automotive Network, Inc., Copyright ©2026
