Tranny Problem . . Hydrolic System going bad?
Johnny Groovez
08-13-2004, 12:53 AM
Yea once again its me with a new problem . .
My tranny is going bad and im not sure what i need to fix . . here goes .
In the mornings my clutch is basically on the floor and i have to pump it a couple times to get i to go into other gears . . when i go past 80 or so the clutch pedal gets really weak and engages too close to the floor . . i bought clutch fluid and filled it up but im not sure why sometimes my clutch gets weak . . feels like there is no pressure being put into the tranny . . and sometimes when the rpm's are too high it grinds 5th. . someone told me get my slave and master cylinders checked out . . . but im really depressed . . any ideas?
Thanks
My tranny is going bad and im not sure what i need to fix . . here goes .
In the mornings my clutch is basically on the floor and i have to pump it a couple times to get i to go into other gears . . when i go past 80 or so the clutch pedal gets really weak and engages too close to the floor . . i bought clutch fluid and filled it up but im not sure why sometimes my clutch gets weak . . feels like there is no pressure being put into the tranny . . and sometimes when the rpm's are too high it grinds 5th. . someone told me get my slave and master cylinders checked out . . . but im really depressed . . any ideas?
Thanks
partyhardryan16
08-13-2004, 11:47 AM
u can get master and slave cylinders really cheap off the internet, labor might cost a bit thoug, not sure what the hours are on that, what year is ur car and how many miles?
Johnny Groovez
08-13-2004, 01:32 PM
96 DOHC VTEC . . 112,000 miles on it. . . today i was trying to bleed the clutch to see if air got in . . but i couldnt find the right tool and the hurricane "charley" is gettin ready to spank us . . i was also told it could be the slave cylinder.
Automotive Network, Inc., Copyright ©2025