ran a 14.3 at the track last night
2kBlkGTP
08-12-2004, 04:19 PM
yesterday i ran a 14.3 with a DHP 1.0, dynomax cat-back, FWI and ZZP stage 1 throttle body...not to bad for so little mods..tomorrow my Random Technology downpipe - high flow cats and u-bend delete. hopefully bring me below 14 or 14flat ne1 have any guesses to what i'll run next time?
jeffs_GTP_sleeper
08-12-2004, 05:28 PM
yesterday i ran a 14.3 with a DHP 1.0, dynomax cat-back, FWI and ZZP stage 1 throttle body...not to bad for so little mods..tomorrow my Random Technology downpipe - high flow cats and u-bend delete. hopefully bring me below 14 or 14flat ne1 have any guesses to what i'll run next time?
Nice times. With the new downpipe/high-flow cat(or no cat)/U-bend you definitely have a chance at 13s. Especially if the 14.3 was on a 2.2+ 60'
What was your 60ft and trap speed? You have a 3.4 on it right?
Nice times. With the new downpipe/high-flow cat(or no cat)/U-bend you definitely have a chance at 13s. Especially if the 14.3 was on a 2.2+ 60'
What was your 60ft and trap speed? You have a 3.4 on it right?
Ripn12s
08-12-2004, 05:29 PM
Stock pulley or 3.4??
Good job.
Good job.
boots03
08-12-2004, 06:31 PM
damn, then i own a factory freak, i run a 14.49 in the 1320, and im bone stock
2kBlkGTP
08-12-2004, 07:15 PM
as of now i am running that with the stock pulley...i think my 60' time was like 2.166 and trap speed was like 96mph i will get my time slip outa my wallet its somewhere in my room right now...i have a 3.25 pulley(not installed) but i think that is too small i dont want KR so i am looking to buy a 3.4..i think i had a good time for a stock pulley, i will go get my timeslip now i'll post everything in a sec.
Chris
Chris
2kBlkGTP
08-12-2004, 07:19 PM
OK i found my timeslip..here it is
R/T - .511
60 - 2.116
330 - 5.986
1/8 - 9.227 MPH - 76.20
1000 - 12.013
1/4 - 14.344 MPH - 96.55
R/T - .511
60 - 2.116
330 - 5.986
1/8 - 9.227 MPH - 76.20
1000 - 12.013
1/4 - 14.344 MPH - 96.55
jeffs_GTP_sleeper
08-12-2004, 07:43 PM
as of now i am running that with the stock pulley...i think my 60' time was like 2.166 and trap speed was like 96mph i will get my time slip outa my wallet its somewhere in my room right now...i have a 3.25 pulley(not installed) but i think that is too small i dont want KR so i am looking to buy a 3.4..i think i had a good time for a stock pulley, i will go get my timeslip now i'll post everything in a sec.
Chris
That is a great time for a stock pulley and your mods. With the 3.4 and those other mods I would be real interested to see if you get to the 13s.
And the 14.49 is a great stock time as well, good job. Put some mods on it!
Chris
That is a great time for a stock pulley and your mods. With the 3.4 and those other mods I would be real interested to see if you get to the 13s.
And the 14.49 is a great stock time as well, good job. Put some mods on it!
2kBlkGTP
08-12-2004, 07:48 PM
well do u think i'll get into the 13's with the RT downpipe and a 3.4 pulley? or even just the downpipe?
jeffs_GTP_sleeper
08-12-2004, 08:13 PM
That would be a feat if you could get 13s on the stock pulley and tires.
well do u think i'll get into the 13's with the RT downpipe and a 3.4 pulley? or even just the downpipe?
I think it will take both, but maybe with just the pulley and a slightly better launch.
Good Luck!
well do u think i'll get into the 13's with the RT downpipe and a 3.4 pulley? or even just the downpipe?
I think it will take both, but maybe with just the pulley and a slightly better launch.
Good Luck!
2kBlkGTP
08-13-2004, 09:00 AM
oh but i will try to get 13's with stock pulley and tires :sunglasse
kustomkid54
08-16-2004, 10:42 AM
I don't think your going to make it with a stock pulley. But good luck. Let us know.
http://img.photobucket.com/albums/v425/kustomkid54/1998PontiacGrandPrixGTP004.jpg
http://img.photobucket.com/albums/v425/kustomkid54/1998PontiacGrandPrixGTP004.jpg
Automotive Network, Inc., Copyright ©2026