95 AWD Runs on one coil only
G-Force
08-09-2004, 03:11 PM
Dear forum,
My '95 AWD Talon decided to not start one day. No previous warning. No mods. In trying to start it, it backfired and blew the BOV. I replaced it with an updated one but of course that was not the problem. The trouble code had:
8/2/2004
P0302 Cylinder #2 Misfire
P0340 CAM LOCATION SIGNAL - NO SIGNAL
P1400 Differential Pressure Feedback EGR Circuit Low Input
O2 sensors have 60-80mV when trying to run.
I tested the spark plugs one at a time and noticed that cyl. 1 + 4 were not firing. They are on a common coil so I replaced the coil but that was not the problem. I thought it must be the cam location sensor so I called the dealer and they said it is not likely the sensor because neither coil should fire then.
Anybody know what the problem could be?
My '95 AWD Talon decided to not start one day. No previous warning. No mods. In trying to start it, it backfired and blew the BOV. I replaced it with an updated one but of course that was not the problem. The trouble code had:
8/2/2004
P0302 Cylinder #2 Misfire
P0340 CAM LOCATION SIGNAL - NO SIGNAL
P1400 Differential Pressure Feedback EGR Circuit Low Input
O2 sensors have 60-80mV when trying to run.
I tested the spark plugs one at a time and noticed that cyl. 1 + 4 were not firing. They are on a common coil so I replaced the coil but that was not the problem. I thought it must be the cam location sensor so I called the dealer and they said it is not likely the sensor because neither coil should fire then.
Anybody know what the problem could be?
G-Force
08-23-2004, 01:02 PM
Update: replaced the power transistor. No help.
Automotive Network, Inc., Copyright ©2026