questions on intake

i bought a used injen intake pipe, and its durty as fuck inside!! any good idea's about how to clean that baby up, so its nice and clean inside>?<

Theres a cleaner called Purple cleaner i believe it woul work on that, i used it to clean grease off an exhaust, i think some dust would come off.

Or try the usual basics...carb cleaner, gas, or hot sopay water...

Stick the MAF on one side and the turbo on the other and never look inside the Injen again. :)

better start scrubbing

Stick the MAF on one side and the turbo on the other and never look inside the Injen again. :)


lol :naughty:

maybe transmission fluid or any wheel cleaner

Get a pressure washer but coat it with a degreeser then wash away..pressure washers rule at that kind of stuff

try some of that orange -glow shit off tv,,maybe that will work,but i would use some rim cleaner that stuff is pretty strong,it almost desolves break dust,

Rag. Install. done.

i cleaned my IC pipes and intake using a test-tube/bottle feeder spindle brush, and some dishwashing liquid. worked fine.

juss let it soak in somethin. it will slowly disolve away and all u do is wipe away.

i cleaned my IC pipes and intake using a test-tube/bottle feeder spindle brush, and some dishwashing liquid. worked fine.


Definately what I would do too