How To Bleed Hydraulic Clutch for 1990 Honda Accord

If anyone knows how to bleed a hydraulic clutch for a 1990 Honda Accord please e-mail me and tell me how to.

blondie_crackhead25@hotmail.com


thanks

there should be a small zerc fitting on the end of the hydraulic line going into the tranny - open that a quarter turn or so until it spins a little free. stick a bleeder hose onto that and the other end into a bowl with some fluid already in it. have someone else pump the clutch back and forth until there are no more bubbles coming out. then close the little zerc fitting and test. if it doesn't work then do it again.