Stock LT1 parts For sale

Make me some offers on this stuff. I had a complete extra LT1 and since I sold the car I have no use for this stuff. If you need anything that is in the Motor and you do not see it here, E mail me at [email protected] and ask if I have it. I think the only things I do not still have are the heads, cam, Fuel Rails, and Opti.

Block, standard bore-

Crank, believe the rod journals are turned 0.030 (the Rod bearings say 0.030 on them).-

Rods X 16. I have 2 sets of rods, some have spun bearings, but more than 8 should be good. All would be good after resizing (still cheaper than buying new). They have pistons on them, but 2 of the 16 pistons have broken skirts.-

Balancer-

Balancer Hub-

Timing cover (94-95)-

Flexplate-

Intake-

Injectors-

Sensors- E mail me which one you need

Oil pan-

Low Oil Sensor-

water pump-

Throttle Body-

Oil pump-

valve covers- (i have 3 sets I think)

Accy Bracket (looks like some holes need tapped)-

Tensioner-

Pushrods (hardened)- (I have 2 sets)

Lifters-

TH400 Transmission form 1967 SS. Needs rebuilt

are those factory pushrods or aftermarket? if aftermakret what brand and model? I need hardened pushrods.

Factory hardened pushrods. Make an offer. I have 2 sets.

anybody need anything? I also have a Stock K member for an LT1!

What do you want for your intake and injectors??

Dober, you have an E mail with a quote shipped to canada.

I might be interested in the waterpump. Could you shoot me a email with a shipped quote to 32303 to [email protected]. Thanks

sent you mail

What do you want for the TH400 needing rebuilt? And what for the rods? Thanks a bunch.
Jake

The Tranny is worth a lot more to a restoration person probably that what the average buyer would want to pay. I would like $200 for the tranny because It is a date match for a 67 SS Big Block car.

The rods, i will let all 16 go with the Pistons for $125. They are GM's Powdered rods GM part number 10108688. They were GM's replacement for the 'Pink rods' because they were Stronger and more reliable. GM's list Price is $57 per rod or $456 if you bought 8 seperately. I am offering 16 rods with 14 good pistons for $125. (piston Part number is 10159436 and retail for $109 each)

THose Prices on pistons/reds and tranny do not include shipping.

Will the hardened push rods work on my gen 1 L98 block or are they only good for gen 2 blocks?

the only INTERNAL parts really diff on the GEN I and GEN II are heads, distributor, and stuff. the pushrods, crank, rods, and pistons are the same.

So what do you want for a set of pushrods?? Im assuming they will be good for atleast 5k rpms right??

Yes, I had them in my bolt on car running to a little over 6k. $30 plus shipping.

ttt