Coil Spring Replacement

Good day! Going to install a set of front coil springs on my 89 Ford Ranger 4 wd Supercab this weekend. Any advice or tips before I begin?

Thanks

Derrick

New Brunswick, Canada.:cheers:

use alot of PB Blaster to help loosen up that bottom nut that holds the coil in place. Also disconnecting the front sway bar from the frame will allow a little extra travel of the TTB to help remove the spring, other than that, good luck.

Thanks. Whats PB Blaster?

I Heard it on another website. Also known as Rust Eater or that stuff you spray to free up rusted bolts. Sorry about that...Are those lifted springs you're installing, or just stock replacements?

pb blaster is a higher grade wd40, it works about three times as good

Good day! Going to install a set of front coil springs on my 89 Ford Ranger 4 wd Supercab this weekend. Any advice or tips before I begin?

Thanks

Derrick

New Brunswick, Canada.:cheers:



just make sure you get the right kind of coil compresors... they should be enternal not external