Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

1985 s10 blazer


tmonty211
07-19-2004, 03:51 AM
hey

the mph gauge and oil presure gauge dont work on my 85 blazer v6 4x4.
can any one help me find a solution on fixing these tacks??? also in 2nd - 5th gear the tranny slips but only at full throtle. could this be the clutch or the tranny? the clutch is almost gone and ctches at the last 2 in. on the pedle. can any one help me with any of there questions??
thanks monty211 u can e-mail me if you have any questions or solutions [email protected]

smokey041369
07-20-2004, 11:48 AM
slippage with a manual trans is cause by 1. clutch out of adjustment or 2. bad clutch

mph- replace the cable

oil pressure- the senor is located by the oil filter check the wire and remove the sensor to see if it plugged

TuckerR1980
07-20-2004, 07:20 PM
One thing to also check is take your dash apart and check the plug on the back if they are not all the way snapped in you wont get any reading for your oil pressure. But only do this after making sure it is plugged into the sensor b/c its not a fun job taking everything apart

Add your comment to this topic!