Firewall

I recently purchased a LED kit for my 97 Grand AM SE. I was wondering if there is a hole somewhere in the firewall where I could run the wires from the outside in.

UM no there shouldnt be. sorry

Do you know of any place where I would be able to run the wires from the outside in?

the door jam. Open the hood and on the side just run the wires through the fender.

everytime i see soneone with wires running through the fender they get a leak inside.......i ran mine up the driver side where the interior wiring harness goes through the firewall..... its a pain to get through but once you get it there is no alternative.....(in my opinion) just cram it through with the other wires.... be careful not to damage anyother wires though god luck

Use the bulk head theres like 5 places to pull some wires through , remove the felt like crap on the bulkhead and the plugs that block the holes should be plain view. This goes for all cars and trucks. Theres gonna be a plug where the pedals go through it , then theres a plug where relay wires go through , the plug for the steering column and im pretty sure theres 1-2 more. Just simply climb on the block and look closely. I ran some wires through the fender and for 2 years am still to have water get in. I had to wire some other goodies and started running them through the bulkhead. (I call it a bulk head cus it dont block fire worth a damn so dont correct me thank you) If you need details let me know.