Replace 096 with a 01M trans?
jet-a
07-13-2004, 02:51 AM
I have a '94 Jetta III GL with a bad 096 auto trans and I've come accross a '96 2.0 engine and trans.
I believe the '96 trans is an 01M.
Can my 096 be replaced with this? If so do I need to replace the computer too?
Any input would be appreciated.
Thanx
I believe the '96 trans is an 01M.
Can my 096 be replaced with this? If so do I need to replace the computer too?
Any input would be appreciated.
Thanx
boschmann
07-14-2004, 08:00 PM
They will fit, but are very different. You would have a very difficult time trying to make the electronic part work with your ECM or another ECM work with your fuel system.
jet-a
07-15-2004, 11:26 AM
Thanx for the advice. I think I will wait it out.
If I ever get the time I would like to try to rebuild it myself.
I have rebuilt standard transmissions but never attempted an auto.
Are they alot more difficult and do I need to do anything with the ECM after the rebuild and install?
Thanx again.
Scot
If I ever get the time I would like to try to rebuild it myself.
I have rebuilt standard transmissions but never attempted an auto.
Are they alot more difficult and do I need to do anything with the ECM after the rebuild and install?
Thanx again.
Scot
boschmann
07-15-2004, 04:53 PM
The 096 should be easier than the 01M, but I haven't done either. I don't think there is anything special that has to be done after going through the 096.
Automotive Network, Inc., Copyright ©2026
