wheels wheels wheels

alright folks, instead of having all the answers, this time i have question.

just purchased a set of 17x8 eagle alloy style 203 off ebay.

my stock rims are 16x8.

here's where the question is, the stock wheels have 2 specific for the rear and 2 specific for the front, if they're mixed up they'll rub against the wheel well and i'll only be able to turn the steering wheel half way. no big deal, not like i'm gonna put the front wheels on the back and vica versa. but as for these ones i just bought, I highly doubt they'll be like the stock ones. what do you think i'll need to do, you think they'll just bolt up and be fine, or will i need some sort of spacer or whatnot?

you'll just be stuck with crap that won't fit

nah, i've seen these wheels on a few 3rd gen's, in fact I think tacoma_man has them on one.

them they may need spacers, but they may already have the right offset, esp. if you got them from some1 with a camaro

As long as your new wheels have a 0mm Offset, they should fit fine..

hey geno, what was they on before? i have a set on my 90 rs, but when i ordered mine they fit my car. they didnt use any spacers.

tacoma, I bought em new, so they haven't been on anything yet. they have 0mm offset. me and my dad measured the backspace of one of them and compared to the stock one and there's about a .5in difference, but my dad told me they'll just stick out that much further, so that's not a problem at all. I think it'll look better like that anyway.

yeah mine sticks out too. looks bad ass and you wont beleive how much better that it will handle.

oh i'll believe it, that's why i got em, I also just installed a set of intrax springs in back with lakewood control arms, adjustable panhard bar, and some kyb gas shocks.

up next is the front end rebuild with kyb struts, same intrax springs up there, steering brace, strut tower brace, then subframe connectors. everything is already here just gotta install now. once all that's done it should be able to handle the engine mods.

how much did it cost to rebuilt the fron end?
my rs steering is loose bad. it all happend a year after putting on the big wheels.

I haven't a clue, I got all the parts from my father for $100. he bought all the shit for his 84 berlinetta but he ended up selling the car.

wow what a steal i was going to rebuild my rs's
steering and throw in some new shocks n stuff
i figured a couple of hundred dallars.

i usually just go to summit's site and look around at prices to get a good idea.

how wide do they come stock?

Speaking of shocks and struts are these any good? I found them on ebay and they are a kyb set.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7909844756&category=33590

looks good dude and i beleive that would be a great deal. beware of shipping on ebay. sometimes it cost more than what you paid for the item. shouldnt be to bad though. good luck

I believe shipping is only 30 bucks so thats why i was wondering if they were worth it.

DiabloGT, they're 16x8 stock and the new ones are 17x8, it's the offset that's gonna make em stick out wider.

Tard, they look good to me too.

Sweet then im looking at a set of Bilsteins right now for the front but if I cant get them then ill prolly go with the KYB's.