engine swap?

ive got a 94 ranger single cab, manual with a little crappy 4 cyl. engine, i was wondering if anyone knows if you can swap in a straight 6. from what ive been told the mounts are the same but i dont know if it will fit, so if anyone has any info or links that give info i'd really appreciate it

depends on the year of the motor but it should fit but measure just 2 be sure

I never have seen a slant 6 put in though...you should consider a v6 from another 94 so that you can get the factory motor mounts and have a much easier install....I think a slant 6 is too long

Keep in mind, changing the engines will require changing almost EVERYTHING under the hood. From the electrical harnesses, to your transmission. Good luck.

Keep in mind, changing the engines will require changing almost EVERYTHING under the hood. From the electrical harnesses, to your transmission. Good luck.

i know, thats why im kinda debating whether or not ill be able to do this but thanks for you help

Putting in a 5.0 V-8 requires modifying the heater for clearance and either moving the radiator forward or changing to an electric pusher fan.

Since the 6 will be approximately 6-8" longer than the V-8, you should plan on firewall modifications, too.

This COULD be a cool swap, but if you're looking for something bolt-together, you might want to try some other avenues.

If you do decide to persue this, might I recommend relocating the radiator somewhere else (the bed, maybe) and let the engine show through the grill.

I'm available to bounce ideas off of.

Keith