t3t4 turbo kits

I've been trying to buy a t3-t4 kit for awhile now. Autolab is having problems finding wastegate flanges and the street brawler kit has a 6-8 week wait. Are there any other companies out there that have kits in stock?

http://www.autolabonline.com/
Talk to Bill ... tell him I sent you :)

You can also talk to Aaron at ATS racing (click my siggy pic) ... he can set you up with a turbo of equal capabilities, but it is not a T3T4.

i'm thinking GT30 or the disco potato, what do you think hyde?

What is your goal with your car?

I do not know enough about the disco to talk intelligently, but the GT30 will give you awesome drag racing potential, but forget about autocross type driving.

I chose the T3T4 because I can do a lot with it: drag race, road race and I can handle most autocross courses ~ even won a few events with it. If the autocross has a really tight hairpin (low rpms 2nd gear) I get crushed with lag ... that is the only way.

the disco potatoe i know from my sr20 days. its a gt 2835. its ball bearing and not that big. i had a stock T28 which was slighty smaller so that was not much of an upgrade for the cost of it. it was about $1000 or so and was only capable of flowing a few LB per min more. meaning is was ok for about 20psi maybye 22psi for a 1/4mile here and there where as my stock t28 was good for 18psi and could push 20psi if needed. i had a viper stuck behind me up to 150mph then i blew my motor blow up and not the turbo before he passed me. the Gt28 disco potatoe is capable for 340ish hp