19mm Main Hub Bolt

Is 110 psi on an impact wrench not enough to take this off?

try with an impact gun , still going to take some time.

try with an impact gun

That is what I am using and it wont come off, will hitting it repeatedly make a difference. If it doesn't come off in the first 30 seconds of trigger pulling, do I just need more pressure?

hit it repetitively, try to move the nut a bit forward too, but not too much, just to give it some hits.

screw, unscrew, screw then unscrew until it comes off

thats my technic

It is not cooperating, I just keep hitting it and it just keeps not caring. I just bought the air compressor, would more psi make a difference? :banghead:

It is now starting to beat the edge of the bolt off, any suggestions?

how much tq does the gun has? because is the gun is does not have enough torque then more psi is not doing nothing.

P.S Because I needed a 300lb tq to take that mofo.

*checking

It's off now, I bought a 400lb max wrench and that worked it off!

I told you!! I guess is time to dig in. keep us uptade and pic if you can! :)