I.c.e.calade

A few days ago I picked up the new revell Escalade at my LHS after sitting there trying to think of something to do I decided to load it up with plenty of I.C.E. or In Car Electronics.I sm also going to make the head lights/tail lights function and make functional LED mirrors + other stuff. I'm still kind of lost on wether to lift or lower the car which I would like your opinion on as well as everything else. The tail light and head light in the pics are actually brighter but its hard to tell because of the camera. What do you think?
http://pic13.picturetrail.com/VOL480/2309239/4588327/59259186.jpg
http://pic13.picturetrail.com/VOL480/2309239/4588327/59259071.jpg

Lower it to the ground and and 26's. But they will raise the car back up. So just add the dubs yo.

Working Air suspension on 26s should do the trick, in candy blue.

Thanks everyone I am begining to lean toward lowering but just to help with the desicion here are pics of lowered and lifted.
http://pic13.picturetrail.com/VOL480/2309239/4588327/59267385.jpg
http://pic13.picturetrail.com/VOL480/2309239/4588327/59267378.jpg

i think maybe lift it for something different... all the escalades that you see lately are all on 26's and slammed.. ive only seen a few lifted.... just my 2cents

lowered!!!:D:D

Paint it black, lift it, and deck it with ICE. Now that will be something different :sunglasse:

lift it for sure :sunglasse

lowered...just my dos centavos

If it wasn't an Escalade I'd say lift. But, since it is....

i say be different and lift it. altho they do look sweet sittin on the ground

i think itd be cool either way

The lift is different.
I've heard that there is a Escalade pushing a snowplow somewere in town.
:p

50% say : Lower it
50% say: Lift it

I say: leave it stock height ;)

looks good:) and awesome idea!
i alomst think you shuld rase it... because there is to few raised cars on af... baut do as you want.

I see a lifted one every day wen im on school and it looks pretty stupid so i would say lowered but try one of these technics so that you can lift and lower the car.

http://mad-modeler.ipbhost.com/index.php?showtopic=5

Chck the post by punkmasterplex1

the one titled styrene chassis

Lower it.

i would lower it also, i think they look nice like that. who cares if they are all dropped, build it the way you like to see it. im interested in that ICE system as im planning one for mine too, using some custom stuff.

I like your idea of lifting it even though I am more partial to slamming this baby, but go for the insane lift and paint it bright lime green.

Thanks everyone, I'm still torn between lifting and lowering, I do like dutchboy 618's idea but it might be hard to reain detail and I would want to lift it to be different hmmmmmm..... Anyway while I'm still undecided on it I will still continue with the project.

body drop it :D

Drop it and make it into a Escalade Limo!

Slam it!
What's the largest scale bling bling wheel you can put under the wells?
Does the kit come with large disc brakes that don't look dainty under wheels?
Anyone seen the 26" wheels in real life yet?

I say lift it. There are just too many that are lowered.

body dropped on 26s :D

http://img78.photobucket.com/albums/v353/BillzKustomz/escalade26.jpg

uhh thats the only low escalade i've ever seen

damn, those rims must be taking a lot of place inside the body =|

pesonally id say keep it stock height. Maybe lower it just a bit to keep it stock height when you stick larger wheels on.

Lift

lift it.

Slam it to the ground!

uhh thats the only low escalade i've ever seen
I believe it's the first escalade to be stock floor body dropped.

body dropped on 26s :D

http://img78.photobucket.com/albums/v353/BillzKustomz/escalade26.jpg


Wtf you cant even see the half of the wheels

Lower it,Or do what you please.... Damn the Escalade looks tight^

I think it would look cool lifted


Lil'buman

I believe it's the first escalade to be stock floor body dropped.


THATS A GOOOOOOOD THING! LOL i say, ummmmmmmmm, hmmmmmmmmm..............slam it!

Hmm....I say lift it. We need more lifted trucks here...ya know what they say, LOWRIDERS ARE FOR LITTLE BOYS WHO CANT GET *IT* UP!

lower it

Thanks guys I think I'll worry about the suspension last cause I'm still torn between the 2.Anyway I roughed out the headrest T.V.s today, what do you think?
http://pic13.picturetrail.com/VOL480/2309239/4588327/59377578.jpg

Looks like the escalade has been photochopped. But it looks damn cool!

body dropped on 26s :D

http://img78.photobucket.com/albums/v353/BillzKustomz/escalade26.jpg

I cannot imagine how one can pull that thing out of a driveway without damaging the front bumper!

I cannot imagine how one can pull that thing out of a driveway without damaging the front bumper!

It could be done with air bags right?

It hast to, I think. One thing I notice is the hood opened a bit because of the wheel hitting it.So it must have airbags.

you sure that's the reason? that's at a car show, so i'm sure they're displaying the engine

Im not that certain but how could big huge 26s plus tires not hit the hood?

i dunno, but just imagine from the bottom of the tire to the middle of the wheel, and then imagine that same distance from the middle of the wheel to the top. a photoshop:
http://nwwo.com/chop/meh123.gif
besides, it'd be kinda dangerous to have your tires hit your hood when the airbags are down, and you'd have to pop the hood when you want to park it?

anyway sorry for the thread hijack, just a friendly discussion on fitting 26's under an escalade

I would also lower it.

The monitors "Beds" are looking pretty cool. Are you going to make little monitor tv or just put in a piece of styrene and paint it? Wouldnt it be cool if you made the little tvs and could be moved. like different angles and stuff. That would be awesome!
Overall it looks good man. keep it up

LIFT with ice and chrome bumpers.

those tires wont hit the hood..theres no way. Im sure its on airbags...i mean how would you even get over a speed bump...much less a rock or pebble in the road.

they slam the cars down when there parked, just for show,
i've seen trucks and cars so low they sit on the frame, and the wheels come up off the ground

Great looking model so far !! i would raise it up on some huge mudd tires! you dont see that everyday on a caddy

if you look at that picture. more than half of the wheel is showing in the wheel arch. just by eyeballing the photo. there is plenty of room in the fender to fit the remaining part of the wheel and tire without it hitting the hood.

i dunno, but just imagine from the bottom of the tire to the middle of the wheel, and then imagine that same distance from the middle of the wheel to the top. a photoshop:
http://nwwo.com/chop/meh123.gif
besides, it'd be kinda dangerous to have your tires hit your hood when the airbags are down, and you'd have to pop the hood when you want to park it?

anyway sorry for the thread hijack, just a friendly discussion on fitting 26's under an escalade
sorry but thats not a photo shop that is tuckin 24's on airbags $54,000 worth of truck and money put into it :iceslolan and they dont hit the hood it clears it by like an inch :iceslolan

If your gonna lift it, wat rims/ tires are you using??

Off road tires and rims don't look good but 24" and 26" would look sweet so either lower or lift it but use bling bling rims

barry u dumbass their 26s and yes its stock floor body dropped..which meens it also has bags now anyone else wanna see a hummer h2 on 26s on the ground :D

wheres the engine looks like its got a 6 banger in there. BTW those are 26 believe me that truck rides like total crap even on bags. 26 inch wheels offer the shitiest of all rides, 20s offer the best

were still debating on weather or not to lift it or lower it? I say lift it. (BTW is this the kind where the chassis and supension is all molded as one piece? If its all molded sepeartly, you can use my "Silverado Lift" technique.

Yup its molded sepratley and if I lift it I'm definatley going to follow your totorial.

sorry but thats not a photo shop that is tuckin 24's on airbags $54,000 worth of truck and money put into it :iceslolan and they dont hit the hood it clears it by like an inch :iceslolan

i mustve been understood, i mean the escalade was a photoshop, i meant that i made a photoshop to show about where the top of the tire was