rear disc breaks

i have a parts 92 teg. and i was wondering if it was a big deal to swap the rear disc breaks on to my 90 si.
thanks

put it on, just need the cables too.

there is info in the how-to section at www.4thGenerationCivic.com

You beat me to it, I was going to send him to that site.

thanks guys

thanks guys

no problem, that's what i'm here for :biggrin:

i thought all Si's had disk brakes?

nope only, i think, 90-91 crx's

nope only, i think, 90-91 crx's

yup only the 90-91 crx si's came with rear discs.

Any of you guys around Md I'm selling my rear disc set up.

is the master cylinder with the boster, also a bolt in

You also need to change the proportioning valve so that the right amount of brake fluid pressure goes to the rear discs. The stock master cylinder size for 90-91 CRX Si's is 7/8". If you're master cylinder is smaller than that, I would recommend upgrading it as well.