LS engine upgrades

What is a good buy for a stock 94 engine to gain a lot of hp for cheap

really for alot of hp for cheap... your out of luck... i have a 96 stock and i have dont intake and exhaust... but thats only really gotten it to sound decent... i would say build it up and turbo but thats not cheap at all
keep us updated on what you are plainning to do

Go for the basic intake, header and exhaust mods first. An intake you can make yourself and not spend over 50 bucks. Call around to your local muffler shop and see how much a custom header and exhaust will cost. Some places are cheaper than the pre-built stuff. But after you start working on your motor think about your suspension. Then more power you squeeze out of your motor the harder it is for the suspension. Go for the rotor, calipers and brakepads upgrades first. Then get thicker swaybars, strut bars, performance struts and springs. You'll be able to turn on a dime and give back change. Trust me when I say you will love the way your car wil handle after the suspension mods.

best bang for the buck for my 95 teggy is a cold air intake, hi-flow cat, iridum spark plugs and some fuel management bolt-ons. But for a bit more pricy stuff go with a full cat back exhaust, header, intake manifold, throttle body, clutch and flywheel.

for the most noticable power, i would get some crower 62403 cams with the upgrade valvsprings. gonna cost about $500. should increase your power by 15 whp. but before u put in a set of cams, u wanna free up the flow of the engine first. get and intake, HEADERS, and exhaust. might want to upgrade the fuel system with a fuel presssure regulator too. but go with the usual intake exhaust and headers 1st before u install some cams

HEADER's HELP OUT A LOT!!!

tho if plan on putting a Turbo..don't waste ur money on IT..

Ok everyone is saying headers and intake, so i got that but im not the greatest on exhausts, i dont want one that is kind of high pitched, i like the Greddy Evo II, but is there anything else a little cheaper that sounds like it?

go get the exhaust that i have on my car. it's called a TSUDO N1 full catback exhaust with about 2.4" diameter piping. it sounds really deep and throaty and wont give that annoying high pitched sound. i baught mine off of ebay for $250 shipped to my front door. if u want, u can IM the guy i baught my exhaust from. his aol IM sn is "TOPEBAYSELLER888" and his ebay sn is nissangtrpower. he's a really cool guy. u can also get ur header from him. i have a TSUDO 4-1 header that i baught from him too for $150 buck. both are EXCELLENT quality products. im very satified with my purchase and u will be too

ok cool thanks for the exhaust suggestions, but i already got the headers their 4-1, forgot where i got them from though :smokin:

that guy so go make a home made intake, omg. Well most of those modify cost aleast around 2k. I suggest u add a wet turbo kit on. Around $2,500-$3,000 depend on name brand. It comes with intake, turbo manifold (instead of your header), with thermastat, intercooler, and oil cooler.

if you want power for cheap, your best bet is to save your money for a turbo, period. The power/money ratio can't be beat... even with a relatively small amount of boost you'll have a lot more power than any bolt ons can do for the price.... 2 cents

if you want power for cheap, your best bet is to save your money for a turbo, period. The power/money ratio can't be beat... even with a relatively small amount of boost you'll have a lot more power than any bolt ons can do for the price.... 2 cents

I agree! For the money you just can't beat a turbo kit.

haha two late thread, who agree with me. kornflake dont pose old thread again. We did said the same thing last year.

haha two late thread, who agree with me. kornflake dont pose old thread again. We did said the same thing last year.
:screwy:
ok...i'm going give you the benefit of the doubt and assume you are mentally handicapped. when i said don't reply to old threads, i wasnt being a bitch, but no one likes for old threads to be brought up. Just look at the date before replying if you're confused.

definetly save up for a turbo kit. Especially with an LS motor, you can see some very good gains because the stock motor can easily handle 9-10psi+.

ok...korn flake snow flake. i'm giving you my benefit in your mouth and assume you are a retared queer with a cripple disease, a bitch with a yease infection. when i said your thread is expiried, your being lunatic psycho bitch, but no one likes your expiried too late lame threads to be brought up. Just look at the thread before you make lies to kick it, cuz your even funnier and easily to immuse. Your weak ass lame come back is way wake, so just dont come back with another lame abstract.

silver bullet that is uncalled for, you should really think about deleting that if you want to keep any kind of respect in these forums. :2cents:

Hey silver bullet if you notice you were the one starting the old thread back up

ok...korn flake snow flake. i'm giving you my benefit in your mouth and assume you are a retared queer with a cripple disease, a bitch with a yease infection. when i said your thread is expiried, your being lunatic psycho bitch, but no one likes your expiried too late lame threads to be brought up. Just look at the thread before you make lies to kick it, cuz your even funnier and easily to immuse. Your weak ass lame come back is way wake, so just dont come back with another lame abstract.

ROFLMAO! Please tell me this is a joke. Your grammar couldn't possibly be that bad. Your just trying to be funny right? You don't really talk like that! Do you...

If so, WOW! Pick up a book, something.

^^^^ I agree, I believe me and SilverBullet had this convo before...

By the way, to the people in the military- What is a silver bullet??

^^^lol...nuff said

What is a silver bullet??

For those who don't know, the "silver bullet" is a term used by marines when a heat casualty gets his core tempeture checked. To my knowledge, there is only one method of doing this. That's right, the butt.

nitros.