Got my 2000 Si console in finally.........

Now I'll have to take it back out and dye it to match.If someone will post the pics I'll e-mail them to you,just pm me your e-mail address.

gotta see this...

let's see:

any honda set can go in our ars w/o much modification
can fit teg, crx, and 5th gen dashes in our cars
can put any honda/ acura engine in our cars
can put acura brake setup on our cars

and now this....

i believe we have the most versitile car in the world :lol:

Pics are now in my gallery.

looks nice man, wish i could find one of those. I'd kill for a cup holder....

nice

whoa that looks pretty good. I think you have started something here.

whoa that looks pretty good. I think you have started something here.

when i first read the title...i remeber what u told me :lol: u would have had some S2000 seats and the console

Wow!

I love it... those cupholders ROCK!

when i first read the title...i remeber what u told me :lol: u would have had some S2000 seats and the console

Stop it you are making me feel sick again. :banghead: For those that are clueless, last year before I got my civic, I was going to the auctions frequently and they had a S2000 there that was wrecked in the rear and slight bent in the front. It went for maybe $65-100 and I didn't bid on it. :screwy: I wasn't thinking of parting it out. It still had the seats, console, 2 front wheels, engine,etc. What a loss. I won't let that happen again.

That's looks cool.

I've got the Integra center console right now, but I'm going to take it out and sell it.

Right now I'm looking for a 92-95 Civic center console to put in instead.

which console is easiest to put in that looks the same but has a cup holder? i really want a cup holder...lol - don't feel like getting one of those type R plastic cup holder things

which console is easiest to put in that looks the same but has a cup holder? i really want a cup holder...lol - don't feel like getting one of those type R plastic cup holder things

I went to the junk yard and got a integra console,got it home and really didnt care for it because of how the cupholders were(wouldnt hold a large mcD's iced tea I'd got on way home),looked good though,color was even brown!,but my wife has a 99 si,so I eyeballed her console a while,finally took it out and put it in the hatchback,saw it wouldnt fit(as I'd read on the web),then put it beside the teg console and thought "if i cut here and here it would fit",so I put her console back in before she got home to see her car apart :) took the integra console back the next day to the junkyard and swapped it for the console with shift boot/leather shift knob from a 2000 civic si.It took a while to get it the way I wanted,not because it was hard but because I sorry assed around, what could have been done in one saturday took 2 months .If you try this remember,you can cut more plastic but cant but any back,that was the tricky part,cutting a little at a time so it lined up the way I wanted,all of the cutting was done on the si console EXCEPT for the 2 or 3,i think it was 2,clips that hung down under the radio that hold the lower piece with ashtray to the radio benzel peice,but i still ran it a couple if weeks with the 2 pieces together without clips,no rattles and was not loose.got it to where it was the way I wanted,mounted cupholder in it,I'd had it out so I could see in better,and it wouldnt fit then,the cubbyhole was too big,It was hitting the brace that goes crossways,Back to the junkyard I go,and got the cupholder out of a 96 or 98 4 door,the console was the same but the cupholder/cubbyhole was different.So really I could have got that one to start with but wouldnt have the Si leather shift knob.You do have to cut a piece of the support on each side,the plates that the radio screws into,at the bottom of the brace ,the pieces I cut were about size of a $.50 piece,didnt seem to weaken them any. I used the screw mounts that the factory ashtray lowerpiece screwed into ,as you can see in the pics,I wish I'd made a bracket on each side and used the screwholes that were in the si console,made brackets for the middle,they were the littlest "L" brackets people use in woodworking but I could have used a piece of flatbar bent to a "L",rear bracket was the si one I modified I think it was,still,could have used flatbar.If anybody wants to try it,nexttime I have it out,I'll take some copy paper and trace out a template of eachside and try to scan it or send it to you.The cupholder like I have in now,with the littlle door that opens and closes over the cupholder is easier to put in,but I do plan on modifying the cross brace and using the si cubbyhole,its bigger (more junk space). I got a piece of tan leather ,It matches the headliner perfectly to cover the armrest,I'll cover it and take out the console and spray it with brown dye when I get the time,,,,,Later

that still sounds like a lot of work :(

post the damn pics for us that are too lazy to go into your gallery ;) (i.e. ME) ;)

I'll help you out DpSyCho... for you lazy folks, like Marked001 LOL

http://files.automotiveforums.com/gallery/watermark.php?file=/503/156043console5-med.jpg

http://files.automotiveforums.com/gallery/watermark.php?file=/503/156043console7-med.jpg

http://files.automotiveforums.com/gallery/watermark.php?file=/503/156043console8-med.jpg

very nice fit! wish I had tried that before I wasted so much time trying to look for a teg console while the civic ones were soo abundant.

BUMP for an OLD thread!

I bumped this cause I have never seen EK console in a hatchback until I saw the pics in the 1st page.
Maybe some of you newbies have not either.

Post more pics of the 2000 console!

oh this thread is only 3 months old. Sorry lol i thought it was like over a year old.

Well this is new to me...

It looks good! Now only if you get the colors to match :)

A little sanding, a little paint, a little alignment of fitting, you'll have something unique!

i wish the inside of my car looked like that..