Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


oil pressure


kyrx7
06-23-2004, 11:57 AM
my oil pressure gauge when i first start the car is normal it moves around alot at first but after awhile it goes to 0 and stays on 0 or a little above. it uses no oil between oil changes. and leaks no oil. it runs great except for the boost problem that noone seems to be able to help me with. this is a 1993 twin turbo it has 113000 but i have papers from previous owner where the turbos and engine was rebuilt at 60000 but anyone can make papers. didnt care cause i got the car at a good price.

D3rELiC
06-23-2004, 02:44 PM
you have a problem if your rotary doesnt burn oil..

kyrx7
06-23-2004, 03:17 PM
its never low and clean as a whistle but i also change it every 2000 miles.

Soyo
06-23-2004, 03:19 PM
yea that is deffinately strange... can't think of anything that could cause it right now...

kyrx7
06-23-2004, 03:56 PM
could it just be a bad gauge

tomminajar
06-23-2004, 09:13 PM
Sending unit - No ?? Ground it out and see if it works.

J-Rat
06-23-2004, 11:55 PM
http://www.mazdatrix.com/FAQ/ORING.HTM

dayna240sx
06-24-2004, 01:15 AM
I'd check the sending unit, then the gauge. I doubt its the front o-ring, if it were, the engine wouldnt have lasted as long as it has.

tomminajar
06-24-2004, 03:34 PM
Hook up a mechanical gauge briefly to make sure

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food