B Seires Swap

im doing a B18 swap in my 89 dx hb. was wondering if i couls swap out hubs with a 90-93 Non ABS hub so i dont have to mod the sv axles to fit my std hubs. :eek7: if not what should i do. i know i need axles out of a 90-93 teg. but how do i get them to fit in my civic hub. :screwy:

you have to get dx or si hubs because the std is 4 speed with teh spline count being less. gott aget 5 speed hubs

you cant get 90-93 teg axles to fit on your std hubs

i think the 90-93 hubs will work but i know defineatly that dx and si hubs work on the 4th gen. but to put 90-93 teg axles into the correct hub, you gotta take the dust shield off the hub, but remember they wont fit in your std hubs

i also just noticed you said you have a dx, dx hubs will work. what makes your think you ahve std hubs ? there is a difference between dx and std hubs

i just ment stock hubs sorry bout the std accdently hit the d key. but as for me having a 5 speed i do. so i need to remove the dust plate from the back of my hub and they will slide in spline line up and all that good stuff.

you gotta take the dust shield off the hub

I had to remove the rubber dust ring thing on the axle itself too