Install Instructions on Intake?

I read on the other thread about " Ebay Intakes " . I purchased one from a company off of the great EBAY MOTORS and the listing on it was 94-97 (5gen) Air intake for Accord. Simple polised crome 2 piece piping. with cone filter and sleeves and clamps..problem...no install instructions! Anyone know of a place online with DETAILED install instructions or anyone cud post it up for a 1995 accord EX....Im just going to use the one pipe and make it a SR intake...thanks

bump

well u should remove all hose that is connected to the stock intake. then remove i think 4 bolts that hold the intake filter box to the car and then take that out. losen the clamps that connect to the throttle body and the intake filter box and remove the stock piping. Put on the new intake piping and connect it to the throttle body using that rubber looking cylinder thing that came with it. then put on the clamps and tighten them so the intake is snug to the throttle body. Now put on the intake filter to the other end of the piping using the other clamp... tighten and attach the stock hoses to the new pipe. Then go test drive it by putting the pedal to the metal all the time and listen to that new throaty sound ur engine makes.

its actually 2 bolts that are holding the intake box down to the chasis.