1998 Remote Programing

I need to know how to program a remote for my 98 aurora. I am about to buy one off of ebay within the next couple of weeks. I would like to know how to program it before I buy it.

you'll hafta take it to a GM dealer to have it programmed.

Maybe not, there is a DIY procedure in this forum, I would do a quick search for remote programming.

Good luck

here's how to do it.
Turn ignition switch "off"
Using a fused jumper, juper data line connector terminal 8 (blk/wht) to terminal 4 Blk close all doors
turn ignition switch "on" door locks cycle
press and hold lock and unlock button on one transmitter alter a 30 second delay the doors will lock and unlock
repeat step to program extra transmitters
do not turn off ignition, if switch is turned off the first transmitter will become inoperative.
disconnect jumper from DLC

here's how to do it.
Turn ignition switch "off"
Using a fused jumper, juper data line connector terminal 8 (blk/wht) to terminal 4 Blk close all doors
turn ignition switch "on" door locks cycle
press and hold lock and unlock button on one transmitter alter a 30 second delay the doors will lock and unlock
repeat step to program extra transmitters
do not turn off ignition, if switch is turned off the first transmitter will become inoperative.
disconnect jumper from DLC


Can you post a Pic of the Fuse Jumper that you used?
If not describe the way it looks so I will understand how exactly to use it